Jump to content
  • EN

Template:FMX2YX First start card withoutSD: Difference between revisions

From Teltonika Telematics Wiki
← Older editNewer edit →
VisualWikitext
Arnas.Zeb (talk | contribs)
5,404 edits
No edit summary
Arnas.Zeb (talk | contribs)
5,404 edits
No edit summary
Line 20: Line 20:




[[Image:FMX2YX_cover_open1_correct.png|280px]][[Image:FMX22YX_cover2_correct.png|280px]][[Image:FMX22YX_cover3_correct.png|280px]][[Image:FMX22YX_cover4_correct.png|280px]][[Image:FMX22YX_cover5_correct.png|middle|280px]][[Image:FMX22YX_cover6_correct.png|middle|280px]]
[[Image:FMX2YX_cover_open1_correct.png|280px]][[Image:FMX2YX_cover2_correct.png|280px]][[Image:FMX2YX_cover3_correct.png|280px]][[Image:FMX2YX_cover4_correct.png|280px]][[Image:FMX2YX_cover5_correct.png|middle|280px]][[Image:FMX2YX_cover6_correct.png|middle|280px]]


{|
{|

Revision as of 15:36, 25 January 2022


GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas

File:Fmb230 man.png



How to insert Micro-SIM card

  1. Gently remove FMX2YX cover using plastic pry tool from both sides.
  2. Disassemble the device, remove both sides from the PCB
  3. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  4. Connect the battery
  5. Place the battery in the housing
  6. Attach device cover back.


 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMX2YX_First_start_card_withoutSD&oldid=70511"