Wialon+DUAL CAM solution

Solution description

For monitoring our device we have a lot of third-party platforms but only one which supports the DUAL CAM solution. In this chapter, we will show you how to configure the device and also how to configure the Wialon platform for receiving information from DUAL CAM.

Device configuration

Step 1

Enable codec 8 extended.

Step 2

Configure Domain and Port for the device to send data to the Wialon. Domain: 193.193.165.165 Port: 21448

Step 3 Go to RS232/RS485 and enable DualCam and configure the DualCam image sending setting for your needs.

Step 4

Dual Cam server settings will be the same as for the device.

Domain: 193.193.165.165

Port: 21448

Step 5

Dual Cam Video settings, for the video settings only select Video frame rate to 30 FPS.

Note: Do not activate Video Sending Triggers in the configurator, because if you set this setting and device triggered video the Wialon platform will not accept it. So only from the Wialon side must be set video commands in the next chapter Wialon settings we will show how to configure it.

Wialon configuration

Step 1 Login into Wialon and go to the Units and select New.

Step 2

Configure the device and activate DualCam according to the picture. Note: You must enter device IMEI in Unique ID so only then the device will work correctly with Wialon.

Step 3