FMB130 E-Mark: Difference between revisions

Line 1:

{{emark 25 description|pic=[[File:E25 croatia.png|thumb|right|upright=0.35|300px|E-Mark logo]]}}

E-Mark is the regulations issued by the Economic Commission for Europe (referred to as ECE).

~~==Description==~~

According to the UN European Economic Commission regulations and the provisions of EU directives, in order to enter European market, cars, motorcycles and a variety of components and systems must be certified to meet the basic requirements of traffic safety and environmental protection. E-Mark and e-Mark are the European conformity marks issued by the transport sector, indicating that the products comply with relevant laws and regulations or directives. Vehicles and related products need to go through E-Mark certification process to be legally sold in Europe.

There are currently 28 EU countries in ECE, in addition to EU member countries, including Eastern European, Southern European and other non-European countries. ECE regulations apply to all members is recommended, not mandatory standards. Member States may apply the ECE regulations, or continue to use their own regulations. E-Mark logo is a circular frame, means when the vehicle stop travel, the products must be used, for example: windshield, seat belts, headlights, and so on. Each EU member state has its own number of E-Mark certificate.

==Standards applied==

This Approval shall apply to a type of electrical/electronic sub assemblies (ESA) from serial production under the following conditions:

This Approval shall apply to a type of electrical/electronic sub-assemblies (ESA) from serial production under the following conditions:

Individual products from serial production shall comply at least with all requirements set out in the '''Regulation No. 10 R, Amendment 06, Supplement 037''' "Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility".