Camera Manual: Difference between revisions

Revision as of 13:33, 10 August 2022

Main Page > Video Solutions > Teltonika DualCam > Camera Manual

Package contents

There are several components included in the DualCam package box. These components are necessary to set up the camera and make it functional part of the vehicle.


1. Teltonika DualCam - the main camera unit used to record video/pictures. 
2. Sticky Tape 3M - option no. 1, a double sided sticky tape that can be used to stick the camera unit to the windscreen, this will allow it to be taken off later on without traces.
3. Screws - option no. 2, screws which can be used to screw the camera unit into the designated place just above the windscreen (should not be used on windows).

Product Specification

Technical data	Description
Supported by	FMC125, FMB125, FMB225, FMC225
Day & Night Vision Effect	Day (Color), Night (Black & White)
Angle of View	Horizontal 120°, Vertical 70°
Dual Camera	Front and Rear (equal characteristics)
Camera casing dimensions	126.2 x 36.6 x 36.6 mm
Camera mounting	Sticky tape (3M) or screws
Supported microSD card sizes	16 GB, 32 GB, 64 GB

Electrical parameters	Description
Input voltage range	9 ~ 36 V
Working temperature and humidity	Temperature: -30 °C ~ 85 °C Humidity: <90%
Power consumption	220 mA

Function parameters	Description
Real time clock (RTC) synchronization	Available over FM (via NTP, NITZ or GNSS)
Picture resolution	1280 x 720 (default) (50KB transfer period 18 sec), Configurable: 160 x 120; 320 x 240; 640 x 480; 1920 x 1080
IR Distance	2 Meters
Cable length	RS232 (3.5 m)
Video compression	H.265
Video resolution	720P (20 sec. – 6MB, transfer period ~ 320 sec.)
Video storage	2psc. MicroSD card (Max 64GB up to 72 hours of video)

DualCam data transfer timing

Dual Cam Test time's

@@ Line 5: / Line 5: @@
+  There are several components included in the DualCam package box. These components are necessary to set up the camera and make it functional part of the vehicle.
-  There are several components included in the Dual Cam package. These components are necessary to set up the camera and make it functional part of the vehicle.
   <br>
   '''1. Teltonika DualCam''' - the main camera unit used to record video/pictures.
-  '''2. Sticky Tape''' - option no. 1, can be used to stick the camera unit to the windscreen, this will allow it to be taken off later on without traces.
+  '''2. Sticky Tape 3M''' - option no. 1, a double sided sticky tape that can be used to stick the camera unit to the windscreen, this will allow it to be taken off later on without traces.
-  '''3. Screws''' - option no. 2, can be used to screen the camera unit into the designated place below the roof.
+  '''3. Screws''' - option no. 2, screws which can be used to screw the camera unit into the designated place just above the windscreen (should not be used on windows).