Difference between revisions of "Template:FMX9 First start card"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "centre <b>{{{description|Small and smart tracker with Bluetooth}}}</b> {{{pic|400px|right}}} <br> __TOC__ =='...")
 
m
 
Line 18: Line 18:
  
 
{{{with_battery|
 
{{{with_battery|
# Gently remove {{{model|FMB9YX}}} '''cover''' using '''plastic pry tool''' from both sides.
+
<ol>
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB9YX}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
+
<li> Gently remove {{{model|FMB9YX}}} '''cover''' using '''plastic pry tool''' from both sides.
# Remove the adhesive tape protection.
+
<li> Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB9YX}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
# Place the battery inside the casing of the {{{model|FMB9YX}}}. Make sure the adhesive tape sticks to the casing.
+
<li> Remove the adhesive tape protection.
# Connect the internal battery to the {{{model|FMB9YX}}} PCB.
+
<li> Place the battery inside the casing of the {{{model|FMB9YX}}}. Make sure the adhesive tape sticks to the casing.
# Attach device '''cover''' back. Device is ready to be connected.}}}
+
<li> Connect the internal battery to the {{{model|FMB9YX}}} PCB. <br>
 +
<youtube>https://www.youtube.com/watch?v=fzUxam6QRtM</youtube> <br>
 +
<li> Attach device '''cover''' back. Device is ready to be connected.
 +
</ol>
 +
}}}
 +
 
  
 
{{{SIM1|[[File:FMC920 1.png|320px]]}}}     
 
{{{SIM1|[[File:FMC920 1.png|320px]]}}}     

Latest revision as of 17:09, 21 July 2023

Qsg rut950 teltonika.PNG

Small and smart tracker with Bluetooth

Fmb920 main.png




How to insert Micro-SIM card

  1. Gently remove FMB9YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Attach device cover back.
  4. Device is ready to be connected.


  1. Gently remove FMB9YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Remove the adhesive tape protection.
  4. Place the battery inside the casing of the FMB9YX. Make sure the adhesive tape sticks to the casing.
  5. Connect the internal battery to the FMB9YX PCB.

  6. Attach device cover back. Device is ready to be connected.


FMC920 1.png FMC920 2.png FMC920 3.png

FMC920 4.png FMC920 5.png FMC920 6.png

Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.