Difference between revisions of "DSM Configuration"
From Wiki Knowledge Base | Teltonika GPS
MindaugasK (talk | contribs) (Created page with "==Device configuration== *It is necessary to change '''Data Protocol''' to Codec 8 Extended in the "System" tab. Image:Data_protocol.gif|300p...") |
MindaugasK (talk | contribs) |
||
| Line 4: | Line 4: | ||
[[Image:Data_protocol.gif|300px]] | [[Image:Data_protocol.gif|300px]] | ||
| + | |||
| + | *In '''RS232\RS485''' settings under '''RS232 Settings''' navigate to '''COM1 settings''' and in '''Mode''' parameter selection, open the drop-down menu and select '''DSM''', please also keep the baudrate set to default which is '''115200''' | ||
| + | |||
| + | [[File:Dsm rs232.gif]] | ||
*Make sure to change '''DSM I/O''' feature '''Priorities''' to ''Low, High or Panic'' (Based on your needs). Also set operand and low/high settings in order to receive events based on specific conditions, e.g.: '''Yawning - Low priority - Low/High level 0 - Operand On Exit'''. This would mean that if the person yawns, the camera will detect this scenario, the parameter level will jump from 0 to 1 and will exit the configured high level which is set on exit. This will generate an event and send it to the configured server. | *Make sure to change '''DSM I/O''' feature '''Priorities''' to ''Low, High or Panic'' (Based on your needs). Also set operand and low/high settings in order to receive events based on specific conditions, e.g.: '''Yawning - Low priority - Low/High level 0 - Operand On Exit'''. This would mean that if the person yawns, the camera will detect this scenario, the parameter level will jump from 0 to 1 and will exit the configured high level which is set on exit. This will generate an event and send it to the configured server. | ||
[[File:Dsm io.gif]] | [[File:Dsm io.gif]] | ||
Revision as of 12:43, 1 December 2022
Main Page > Video Solutions > DSM > DSM ConfigurationDevice configuration
- It is necessary to change Data Protocol to Codec 8 Extended in the "System" tab.
- In RS232\RS485 settings under RS232 Settings navigate to COM1 settings and in Mode parameter selection, open the drop-down menu and select DSM, please also keep the baudrate set to default which is 115200
- Make sure to change DSM I/O feature Priorities to Low, High or Panic (Based on your needs). Also set operand and low/high settings in order to receive events based on specific conditions, e.g.: Yawning - Low priority - Low/High level 0 - Operand On Exit. This would mean that if the person yawns, the camera will detect this scenario, the parameter level will jump from 0 to 1 and will exit the configured high level which is set on exit. This will generate an event and send it to the configured server.
