DSM Configuration

Device configuration

• It is necessary to change Data Protocol to Codec 8 Extended in the "System" tab.

• In RS232\RS485 settings under RS232 Settings navigate to COM1 settings and in Mode parameter selection, open the drop-down menu and select DSM, please also keep the baudrate set to default which is 115200

• Make sure to change DSM I/O feature Priorities to Low, High or Panic (Based on your needs). Also set operand and low/high settings in order to receive events based on specific conditions, e.g.: Yawning - Low priority - Low/High level 0 - Operand On Exit. This would mean that if the person yawns, the camera will detect this scenario, the parameter level will jump from 0 to 1 and will exit the configured high level which is set on exit. This will generate an event and send it to the configured server.

• In order to receive event data, a server has to be configured. Navigate to GPRS settings and enter the server details under Server #1 Settings. Details such as domain name and port number are required to be entered.

General settings

• Measurement Units - can either be metric or imperial, Global standard are metric units while in some cases like US and UK - measurement standard is Imperial units.
• Volume level - sets the volume level of DSM camera alerts
• Camera block repeat alarm - DSM camera will release a warning sound if the camera is blocked. This setting allows the camera to repeat warnings until the camera view is clear.

Image/recording settings

• Voice recording -
• Overlay text -
• Mirror display -
• Video format -
• Recording ratio -
• G-sensor sensitivity -

Event settings

• Working speed source -
• Automatic transmit (global) -

Drowsiness

• Activation -
• Vibration -
• Automatic transmit -

Distraction

• Activation -
• Vibration -
• Automatic transmit -

Phone

• Activation -
• Vibration -
• Automatic transmit -

Smoking

Yawning

File upload settings