Getting Started with AWS IoT Core

Note: This page is in development and will be updated.

For quick start guide how to use Teltonika Telematics devices with AWS IoT Core can be downloaded here

Getting Started Guide for AWS IoT can be downloaded here

Document Information

Naming Conventions

• Version - v1.3
• Date - 2022.11.29

Glossary

• FMM130 (tracker) – GNSS tracking device manufactured by Teltonika Telematics.
• Wiki – Teltonika IoT knowledge base - https://wiki.teltonika-iot-group.com/.
• FOTA – Firmware Over The Air.
• Configurator – Tool to configure Teltonika Telematics devices.
• Crowd support forum – knowledge base dedicated for Troubleshooting.

Revision History (Version, Date, Description of change)

Changes in firmware versions and update information can be found in device wiki page: FMM130 firmware errata

Overview

FMM130 is small and professional real-time tracking terminal with GNSS and LTE CAT-M1/NB-IoT/GSM connectivity and backup battery. Device equipped with GNSS/Bluetooth and LTE CAT-M1/NB-IoT modules with fallback to 2G network, internal GNSS and LTE antennas, configurable digital, analogue inputs and digital outputs, negative input, impulse inputs. It is perfectly suitable for applications where location acquirement of remote objects is needed: fleet management, car rental companies, taxi companies, public transport, logistics companies, personal cars and so on.

Hardware Description

DataSheet

FMM130 device data sheet can be downloaded here: DataSheet

Standard Kit Contents

STANDARD PACKAGE CONTAINS

• 10 pcs. of FMM130 trackers
• 10 pcs. of Input/output power supply cables (0.9 m)
• Packaging box with Teltonika branding

More ordering information at: https://teltonika-gps.com/product/fmm130/#ordering

User Provided Items

• FMM130 tracker
• Input/output power supply cable (0.9 m)
• Packaging box with Teltonika branding

Teltonika suggest standard order codes for the device purchase, by contacting us, we can create special order code which would fulfill user needs.

Additional Hardware References

If device was bought without Micro USB included in 1SPQ (Single packet quantity), any other Micro-USB cable is required to configure the device by wire.

Set up your Development Environment

Tools Installation (IDEs, Toolchains, SDKs)

FMM130 comes with our created firmware, therefore no additional development or scripting is required for this unit to support AWS IoT. Only by using Teltonika Configurator FM Configurator versions, connection point of AWS IoT server is required.

Other software required to develop and debug applications for the device

For debugging situations, device internal logs can be downloaded OTA by using our FotaWEB platform or by using Teltonika Configurator.

Set up your hardware

All details about FMM130 can be located in our dedicated wiki page FMM130 Wiki

• Basic device startup instructions provided in FMM130 First Start.
• Device characteristics, power supply information: FMM130 General description
• FMM130 firmware change can be performed via FotaWEB (direct buyer gets access to this platform) or via device Configurator
• Device LED information: FMM130_LED_status
• USB driver download, datasheet and quick start guide downloads: FMM130 Downloads