FISHING BOATS TRACKING WITH IP67 RATING GPS DEVICES

Solution description

Global seafood consumption has more than doubled in the last 50 years, along with overfishing, bottom trawling, the use of explosives, and a wide range of illegal and/or unauthorised fishing. Surely, preserving aquaculture for current and future generations is essential. This has led to the introduction of many fishing restrictions and regulations worldwide but they must be monitored, and Teltonika Telematics can help with that.

We glad that you decide to test our “Fleet Maintenance Schedules (Delivery)” solution. Here you will find how to prepare and to test this solution.

What you need for a solution?

• Teltonika FM device which is compatible with this use case. Recommended devices: FMB225, FMB230, FMB240, FMC225, FMC230, FMM230, FMB965, FMB202, FMB204.

• The SIM card in order to get data to your server.
• FOTA to remotely send the configuration to the device.
• Teltonika Configurator to set up FM device correctly for the solution.

Installation

Device should be mounted with the sticker view to the open sky.

FMC230 device should be mounted with the device logo view to the open sky for the best device performance with not less than ¾ of metal free area. FMC230 has IP67 protection class. Top performance is reached if mounted outside of the vehicle. The device has adhesive tape to securely place the device.
SIM card should be inserted in the module while the connector is plugged off (while module has no power).

Configuration

2. Configuring Fleet Maintenance Schedules:

Parameter ID - Parameter name

Static navigation settings:

• 106 - Static navigation (0 - Disable, 1 - Enable).
• 112 - Static navigation source (1 - Movement, 2 - Ignition, 3 - Movement and Ignition).

Jamming settings:

• 11300 - Scenario settings (0 - Disable, 1 - Low priority, 2 - High priority, 3 - Panic priority).
• 11303 - Eventual records (0 - Disable, 1 - Enable).
• 11304 - Output control (0 - None, 1 - DOUT1, 2 - DOUT2).
• 11305 - Timeout (Seconds "0 - 65535").

Unplug settings:

• 11500 - Scenario settings (0 - Disable, 1 - Low priority, 2 - High priority, 3 - Panic priority).
• 11501 - Eventual records (0 - Disable, 1 - Enable).
• 11502 - Detection mode (0 - Simple, 1 - Advanced).
• 7036 - Send SMS to (Phone number).
• 8036 - Sms text (Text).

AutoGeofencing settings:

• 20000 - Priority (0 - Disable, 1 - Low priority, 2 - High priority, 3 - Panic priority).
• 20002 - Eventual records (0 - Disable, 1 - Enable).
• 20003 - Activation timeout (Seconds "0 - 65535").
• 20001 - AutoGeofence event generating (0 - On exiting zone, 1 - On entering zone, 2 - On both).
• 20005 - Deactivate by (0 - Power voltage, 1 - Digital input 1, 2 - Engine RPM, 3 - Digital input 2, 4 - Digital input 3, 5 - iButton).
• 20004 - Radius (Value "5-1000000").
• 7030 - Send SMS to (Phone number).
• 8030 - Sms text (Text).

Immobilizer settings:

• 11700 - Scenario settings (0 - Disable, 1 - Low priority, 2 - High priority, 3 - Panic priority).
• 11701 - Eventual records (0 - Disable, 1 - Enable).
• 11702 - Output control (0 - Disable, 1 - Enable (DOUT 1), 2 - Enable (DOUT 2)).
• 11703 - iButton list check (0 - Disable, 1 - Enable).
• 60068 - Ignition Off timeout (Seconds "0 - 65535").
• 60076 - Alcotester Check (0 - Disable, 1 - Enable).
• 60077 - BAC Threshold (‰ - percents).
• 60076 - Blood Alcohol Content Event (0 - Disable, 1 - Enable).
• 7140 - Send SMS to (Phone number).
• 8140 - Sms text (Text).

Quick start: From default configuration to Fleet Maintenance Schedules in one SMS:

"  setparam 11800:1;11801:0;101:4;104:30000;105:12000"

Note: Before SMS text, two space symbols should be inserted if no SMS username or password was set in SMS \ Call settings.

Parsing information

2.Parsing example:

Unparsed received data in hexadecimal stream
00000000000004d608130000017738b113a8000efcea74209c63c200b60096050010000c05ef01f0011505c800 450105b50008b600074230fB6c430f3d44006b02f10000601a1000038753000 000017738b1241790000efceb6e 209c63d05b50008b600074230 ff430f3d44006b020000601a100003875300002900017738b11f600001f0011505

AVL Data Packet Part	HEX Code Part
Zero Bytes	00 00 00 00
Data Field Length	00 00 04 d6
Codec ID	08 (Codec 8)
Number of Data 1 (Number of Total Records)	13
Timestamp	00 00 01 77 38 b1 13 a8 (Mon Jan 25 08:37:46 UTC 2021)
Priority	00
Longitude	00 01 77 38
Latitude	b1 13 a8 00
Altitude	0e fc
Angle	ea 74
Satellites	20
Speed	9c 63
N of Total ID	12
N1 of One Byte IO	09
1’st IO ID	EF (AVL ID: 239, Name: Ignition)
1’st IO Value	01
2’nd IO ID	F0 (AVL ID: 240, Name: Movement)
2’nd IO Value	01
3’rd IO ID	15 (AVL ID: 21, Name: GSM Signal)
3’rd IO Value	05
4'th IO ID	50 (AVL ID: 200, Name: Sleep Mode)
4'th IO Value	00
5'th IO ID	45 (AVL ID: 69, Name: GNSS Status)
5'th IO Value	01
N2 of Two Byte IO	5
1’st IO ID	B5 (AVL ID: 181, Name: GNSS PDOP)
1’st IO Value	8
2’nd IO ID	B6 (AVL ID: 32, Name: Coolant Temperature)
2’nd IO Value	61
3’rd IO ID	42 (AVL ID: 66, Name: External Voltage)
3’rd IO Value	30 FC
4'th IO ID	43 (AVL ID: 67,Name: Battery Voltage)
4'th IO Value	0F 3D
5'th IO ID	24 (AVL ID: 36, Name: Engine RPM)
5'th IO Value	06 A2
N4 of Four Byte IO	02
1'st IO ID	29 (AVL ID: 41, Name: Throttle Position)
1’st IO Value	5E
2’nd IO ID	(AVL ID: 16, Name: Total Odometer)
2’nd IO Value	03 87 53
CRC-16	00 00 73 2E

Demonstration in platform

TAVL: Open TAVL → select client → select Street Map → select device → choose the date from which to which to show the records → push advanced → push show button and then you will see in left down corner all information.

WIALON: Open WIALON → open messages → push unit ( select your device) → choose the date from which to which to show the records → select message (data messages) → push execute button and you will see all information.