TAT140 Tracking settings: Difference between revisions

Line 88:

On Move periodic tracking enable or disable periodic data sending when device is On Move. Device will generate and send normal record with event ID 0 and movement AVL ID 240 with a value of 1.

On Move event record enable or disable record sending when device switches tracking scenario from On Stop to On Move. To trigger this event On Move detection time (see Record timestamp shift) timer needs to reach set value. Once event is triggered device will wake up and will trigger one of two records:

1 - if last record did not have a GNSS fix, GNSS module will be turned on and fix obtained.

2 - if last record had a valid GNSS fix, GNSS module will not be turned on and record will contain last good coordinates.

Record will have AVL event 240 with a value of 5 that means "Movement event - On Move" in both cases.

On Moving (s) time period between records when device is working in On Move scenario.

Line 109:

7. Device is looking for GPS Fix (can take up to 3 min., depends on the environment)

8. Device saves record to memory and tries to send it via GPRS (can take up to 2 min., depends on the environment)

9. Device goes to sleep for 28800 s.

9. Device goes to sleep for 28800 seconds.

10. If device was stationary for 600 seconds during On Move scenario device switches to On Stop scenario.

10.1 If On Stop event record is Disabled device does not generate a new record and starts On Stop scenario timer.

10.2 If On Stop event record is Enabled device will wake up, obtain and send new position (GPS fix - up to 3 minutes, record saved, sent via GPRS - up to 2 minutes)

11. Device goes to sleep for 28800 seconds, see step 1.

|}

@@ Line 88: / Line 88: @@
 <b>On Move periodic tracking</b> enable or disable periodic data sending when device is On Move. Device will generate and send normal record with event ID 0 and movement AVL ID 240 with a value of 1.<br>
 <b>On Move event record</b> enable or disable record sending when device switches tracking scenario from On Stop to On Move. To trigger this event <b>On Move detection time</b> (see Record timestamp shift) timer needs to reach set value. Once event is triggered device will wake up and will trigger one of two records:<br>
 - if last record did not have a GNSS fix, GNSS module will be turned on and fix obtained.<br>
 - if last record had a valid GNSS fix, GNSS module will not be turned on and record will contain last good coordinates.<br>
 Record will have AVL event 240 with a value of 5 that means "Movement event - On Move" in both cases.<br>
 <b>On Moving (s)</b> time period between records when device is working in On Move scenario.<br>
@@ Line 109: / Line 109: @@
 . Device is looking for GPS Fix (can take up to 3 min., depends on the environment)<br>
 . Device saves record to memory and tries to send it via GPRS (can take up to 2 min., depends on the environment)<br>
-. Device goes to sleep for 28800 s.<br>
+. Device goes to sleep for 28800 seconds.<br>
 . If device was stationary for 600 seconds during On Move scenario device switches to On Stop scenario.<br>
 .1 If <b>On Stop event record</b> is <b>Disabled</b> device does not generate a new record and starts On Stop scenario timer.<br>
 .2 If <b>On Stop event record</b> is <b>Enabled</b> device will wake up, obtain and send new position (GPS fix - up to 3 minutes, record saved, sent via GPRS - up to 2 minutes)<br>
+. Device goes to sleep for 28800 seconds, see step 1.<br>
 |}