Difference between revisions of "Test parameters"
From Wiki Knowledge Base | Teltonika GPS
| Line 26: | Line 26: | ||
4 – GNSS <br /> | 4 – GNSS <br /> | ||
8 – CAN Speed | 8 – CAN Speed | ||
| − | | style="vertical-align: middle; text-align: center;" |The selection of movement detection source/sources, which determines how the device will switch between "On stop" and "Moving' working modes in "Data Acquisition" settings | + | |
| + | | style="vertical-align: middle; text-align: center;" |The selection of movement detection source/sources, which determines how the device will switch between "On stop" and "Moving' working modes in "Data Acquisition" settings. Multiple sources can be enabled by adding appropriate values. Example: Ignition (1) + Accelerometer (2) = 3. | ||
|- | |- | ||
| style="vertical-align: middle; text-align: center;" |133 | | style="vertical-align: middle; text-align: center;" |133 | ||
Revision as of 15:13, 28 November 2023
System Parameter List
System Settings
| Parameter ID | Property Name | Value range | Values | Description | |
|---|---|---|---|---|---|
| Min | Max | ||||
| 138 | Movement Source | 1 | 15 |
1 – Ignition |
The selection of movement detection source/sources, which determines how the device will switch between "On stop" and "Moving' working modes in "Data Acquisition" settings. Multiple sources can be enabled by adding appropriate values. Example: Ignition (1) + Accelerometer (2) = 3. |
| 133 | Speed Source | 0 | 1 |
0 – GNSS |
Parameter, which determines which speed source to use |
| Parameter ID | Property Name | Value range | Values | Description | |
|---|---|---|---|---|---|
| Min | Max | ||||
| 106 | Static Navigation | 0 | 1 |
0 – Disable |
Static Navigation is a filter, which filters out location jumps when the vehicle is stationary |
| 112 | Static Navition Source | 0 | 3 |
0 – Movement Source |
Static nativation exit (movement) detection source |
