Difference between revisions of "Template:TATXYZ Bluetooth® settings"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "__TOC__ ==BLE Feature Sensors== Allows to configure universal or EYE sensors for data reading or BLE beacons for use with Recovery mode.<br> Image:TAT BLE Sensor configurat...")
 
Line 27: Line 27:
 
*#Offset – value to be added to output data. '''Used only with Save action.'''  <br />
 
*#Offset – value to be added to output data. '''Used only with Save action.'''  <br />
 
<br>
 
<br>
 +
<b>MAC</b> - MAC address of the universal sensor.<br>
 
<br>
 
<br>
−
<b>MAC</b> - MAC address of the universal sensor.<br>
+
[[Image:Lost universal sensor.png|200px|right]]
 
<b>Lost Sensor Alarm</b> - When enabled TAT device will generate a record to notify that sensor has been lost. Required to be enabled for Recovery mode trigger "Lost BLE sensor" to work. <br>
 
<b>Lost Sensor Alarm</b> - When enabled TAT device will generate a record to notify that sensor has been lost. Required to be enabled for Recovery mode trigger "Lost BLE sensor" to work. <br>
−
When universal sensor is lost TAT will send a record with even number that is the first configured IO element. In below example if sensor is lost device will generate a record with event ID 29 (BLE Battery #1:29). If it was configured for second sensor, record will have event ID 20 (BLE Battery #2:20). <br>
+
When universal sensor is lost TAT will send a record with even number that is the first configured IO element. In shown example if sensor is lost device will generate a record with event ID 29 (BLE Battery #1:29). If it was configured for second sensor, record will have event ID 20 (BLE Battery #2:20). Depending on the type of IO element this AVL ID will have one of two values:<br>
−
[[Image:Lost universal sensor.png|200px|none]]<br />
+
<code>-4162</code> - if configured data is integer<br>
 +
<code>BEEF</code> - if configured data is sent as HEX number.
 +
<br />
  
 
===EYE Sensor===
 
===EYE Sensor===
−
When EYE Sensors mode is selected MAC address of the sensor will need to be entered. [[Image:TAT EYE Sensor window.png|500px|none]]<br />
+
When EYE Sensors mode is selected MAC address of the sensor will need to be entered. [[Image:TAT EYE Sensor window2.png|200px|none]]<br />
 
<b>MAC</b> - MAC address of the EYE Sensor.<br>
 
<b>MAC</b> - MAC address of the EYE Sensor.<br>
 +
<br>
 
<b>Lost Sensor Alarm</b> - When enabled TAT device will generate a record to notify that EYE Sensor has been lost. Required to be enabled for Recovery mode trigger "Lost BLE sensor" to work. <br>
 
<b>Lost Sensor Alarm</b> - When enabled TAT device will generate a record to notify that EYE Sensor has been lost. Required to be enabled for Recovery mode trigger "Lost BLE sensor" to work. <br>
 
<code>AVL ID 463, value BEEF</code> - Lost BLE1 EYE Sensor.<br>
 
<code>AVL ID 463, value BEEF</code> - Lost BLE1 EYE Sensor.<br>
Line 41: Line 45:
 
<code>AVL ID 471, value BEEF</code> - Lost BLE3 EYE Sensor.<br>
 
<code>AVL ID 471, value BEEF</code> - Lost BLE3 EYE Sensor.<br>
 
<code>AVL ID 475, value BEEF</code> - Lost BLE4 EYE Sensor.<br>
 
<code>AVL ID 475, value BEEF</code> - Lost BLE4 EYE Sensor.<br>
 +
<br>
 +
When EYE Sensor is configured, TAT device will automatically map data to below IO elements -<br>
 +
{| class="wikitable" style="width: 80%;"
 +
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |'''Sensor Data'''
 +
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |'''IO Element'''
 +
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |'''AVL ID'''
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 1 Temperature
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Temp #1
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 25
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 1 Battery
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Battery #1
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 29
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 1 Humidity
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Humidity #1
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 86
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 1 Flags
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE1 Custom #1
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 331
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 1 Movement Counter
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE1 Custom #2
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 463
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 1 Angle (pitch)
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE1 Custom #3
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 464
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 1 Angle (roll)
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE1 Custom #4
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 465
 +
|-
 +
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 2 Temperature
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Temp #2
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 26
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 2 Battery
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Battery #2
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 20
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 2 Humidity
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Humidity #2
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 104
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 2 Flags
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE2 Custom #1
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 332
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 2 Movement Counter
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE2 Custom #2
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 467
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 2 Angle (pitch)
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE2 Custom #3
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 468
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 2 Angle (roll)
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE2 Custom #4
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 469
 +
|-
 +
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 3 Temperature
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Temp #3
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 27
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 3 Battery
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Battery #3
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 22
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 3 Humidity
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Humidity #3
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 106
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 3 Flags
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE3 Custom #1
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 333
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 3 Movement Counter
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE3 Custom #2
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 471
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 3 Angle (pitch)
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE3 Custom #3
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 472
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 3 Angle (roll)
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE3 Custom #4
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 473
 +
|-
 +
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 4 Temperature
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Temp #4
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 28
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 4 Battery
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Battery #4
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 23
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 4 Humidity
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE Humidity #4
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 108
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 4 Flags
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE4 Custom #1
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 334
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 4 Movement Counter
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE4 Custom #2
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 475
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 4 Angle (pitch)
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE4 Custom #3
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 476
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EYE Sensor 4 Angle (roll)
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | BLE4 Custom #4
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 477
 +
|-
 +
|}
 +
  
 
===Eddystone===
 
===Eddystone===

Revision as of 14:19, 26 March 2024

BLE Feature Sensors

Allows to configure universal or EYE sensors for data reading or BLE beacons for use with Recovery mode.

size


BLE Feature:

None – Bluetooth functionality will be disabled.
Sensors – Enables Bluetooth functionality for universal sensors, EYE Sensors and beacons.
Backup Tracker - Enables Backup Tracker

Update frequency - Sets BLE update frequency if Backup Tracker or BLE beacon is configured. Scan for universal sensors or EYE Sensors is only performed with periodic or scheduled records. To increase BLE scan frequency when using universal sensors or EYE Sensors, Operand in IO elements needs to be configured.

AAS scenario - When enabled TAT device will only perform BLE scan while it is in "On Move" tracking scenario. While device is stationary BLE scan does not initiate.

Sensor

When Sensors mode is selected a table with configurable parameters will appear:

TAT sensors window.png


  • The table has 9 types of parameters:
    1. Type – EIR data type. This parameter will indicate which type to look for and work with.
    2. Data Offset – start index of data we are interested in.
    3. Data Size – size of the data we are interested in. Limited to 2 bytes of data.
    4. Action – two actions are possible: Match and Save. Match means that we want to perform a validation of certain data. Save means that we want to get certain data and later save it to an AVL record.
    5. IO – tells which IO element's data will be saved to. Used only with Save action.
    6. Match – hex string to be matched with BLE sensor data. Used only with Match action.
    7. Endianness – endianness of data: little endian (ex. 0x1122) or big endian (ex. 0x2211). Used only with Save action.
    8. Multiplier – value to be used to multiply output data. Used only with Save action.
    9. Offset – value to be added to output data. Used only with Save action.


MAC - MAC address of the universal sensor.

Lost universal sensor.png

Lost Sensor Alarm - When enabled TAT device will generate a record to notify that sensor has been lost. Required to be enabled for Recovery mode trigger "Lost BLE sensor" to work.
When universal sensor is lost TAT will send a record with even number that is the first configured IO element. In shown example if sensor is lost device will generate a record with event ID 29 (BLE Battery #1:29). If it was configured for second sensor, record will have event ID 20 (BLE Battery #2:20). Depending on the type of IO element this AVL ID will have one of two values:
-4162 - if configured data is integer
BEEF - if configured data is sent as HEX number.

EYE Sensor

When EYE Sensors mode is selected MAC address of the sensor will need to be entered.

TAT EYE Sensor window2.png


MAC - MAC address of the EYE Sensor.

Lost Sensor Alarm - When enabled TAT device will generate a record to notify that EYE Sensor has been lost. Required to be enabled for Recovery mode trigger "Lost BLE sensor" to work.
AVL ID 463, value BEEF - Lost BLE1 EYE Sensor.
AVL ID 467, value BEEF - Lost BLE2 EYE Sensor.
AVL ID 471, value BEEF - Lost BLE3 EYE Sensor.
AVL ID 475, value BEEF - Lost BLE4 EYE Sensor.

When EYE Sensor is configured, TAT device will automatically map data to below IO elements -

Sensor Data IO Element AVL ID
EYE Sensor 1 Temperature BLE Temp #1 25
EYE Sensor 1 Battery BLE Battery #1 29
EYE Sensor 1 Humidity BLE Humidity #1 86
EYE Sensor 1 Flags BLE1 Custom #1 331
EYE Sensor 1 Movement Counter BLE1 Custom #2 463
EYE Sensor 1 Angle (pitch) BLE1 Custom #3 464
EYE Sensor 1 Angle (roll) BLE1 Custom #4 465
EYE Sensor 2 Temperature BLE Temp #2 26
EYE Sensor 2 Battery BLE Battery #2 20
EYE Sensor 2 Humidity BLE Humidity #2 104
EYE Sensor 2 Flags BLE2 Custom #1 332
EYE Sensor 2 Movement Counter BLE2 Custom #2 467
EYE Sensor 2 Angle (pitch) BLE2 Custom #3 468
EYE Sensor 2 Angle (roll) BLE2 Custom #4 469
EYE Sensor 3 Temperature BLE Temp #3 27
EYE Sensor 3 Battery BLE Battery #3 22
EYE Sensor 3 Humidity BLE Humidity #3 106
EYE Sensor 3 Flags BLE3 Custom #1 333
EYE Sensor 3 Movement Counter BLE3 Custom #2 471
EYE Sensor 3 Angle (pitch) BLE3 Custom #3 472
EYE Sensor 3 Angle (roll) BLE3 Custom #4 473
EYE Sensor 4 Temperature BLE Temp #4 28
EYE Sensor 4 Battery BLE Battery #4 23
EYE Sensor 4 Humidity BLE Humidity #4 108
EYE Sensor 4 Flags BLE4 Custom #1 334
EYE Sensor 4 Movement Counter BLE4 Custom #2 475
EYE Sensor 4 Angle (pitch) BLE4 Custom #3 476
EYE Sensor 4 Angle (roll) BLE4 Custom #4 477


Eddystone

iBeacon

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:TATXYZ_Bluetooth®_settings&oldid=97061"