Changes

no edit summary
Line 1: Line 1:  
AutoCAN function allows user to automatically scan for available messages on CAN bus and configure CAN data sending to server. In order to configure AutoCAN connect FMB630 to computer with Port ½ cable. Launch FMB630 configurator version 1.1.1.7 or higher. Push “Connect“ button, then „CAN“ button. CAN configuration menu will be opened.
 
AutoCAN function allows user to automatically scan for available messages on CAN bus and configure CAN data sending to server. In order to configure AutoCAN connect FMB630 to computer with Port ½ cable. Launch FMB630 configurator version 1.1.1.7 or higher. Push “Connect“ button, then „CAN“ button. CAN configuration menu will be opened.
   −
{{{image1|[[FMB630_autoCAN1.png|center|500px]]}}}
+
{{{image1|[[Image:FMB630_autoCAN1.png|center|500px]]}}}
    
* SCAN scans once for available messages on CAN bus;
 
* SCAN scans once for available messages on CAN bus;
Line 9: Line 9:  
* Manual CAN tab – Configure CAN by manually entering CAN message ID and data mask;
 
* Manual CAN tab – Configure CAN by manually entering CAN message ID and data mask;
   −
{{{image2|[[FMB630_autoCAN2.png|center|200px]]}}}
+
{{{image2|[[Image:FMB630_autoCAN2.png|center|200px]]}}}
    
To start CAN configuration push “SCAN“ button. A table of all available CAN messages will appear (Figure 100). Description of columns:
 
To start CAN configuration push “SCAN“ button. A table of all available CAN messages will appear (Figure 100). Description of columns:
Line 30: Line 30:  
* High – allows to choose High level for Data acquisition;
 
* High – allows to choose High level for Data acquisition;
   −
{{{image3|[[FMB630_autoCAN3.png|center|300px]]}}}
+
{{{image3|[[Image:FMB630_autoCAN3.png|center|300px]]}}}
 
   
 
   
 
  CAN monitoring
 
  CAN monitoring

Navigation menu