Changes

3,194 bytes added ,  13:39, 17 August 2021
no edit summary
Line 1: Line 1:  
__TOC__
 
__TOC__
   −
==Beacon Settings==  
+
==Beacon Settings before FW ver. 3.27.07.00==  
 
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>
 
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>
    
'''Beacon Detection'''<br>
 
'''Beacon Detection'''<br>
 
* '''''Disabled''''' – Functionality disabled.<br>
 
* '''''Disabled''''' – Functionality disabled.<br>
* '''''All''''' – All visible beacons are detected (Max. 100).<br>
+
* '''''All''''' – All visible beacons are detected.<br>
 
* '''''Configured''''' – Only beacons from the list are sent to server<br>
 
* '''''Configured''''' – Only beacons from the list are sent to server<br>
   Line 26: Line 26:  
[[Image:Configured.png|300px|none]]
 
[[Image:Configured.png|300px|none]]
   −
==Beacon List==
+
===Beacon List===
 
List of authorized beacons. Eddystone and iBeacon protocols are supported*.<br>
 
List of authorized beacons. Eddystone and iBeacon protocols are supported*.<br>
   Line 51: Line 51:  
Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br />
 
Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br />
   −
==Beacon On Change==
+
==Beacon Settings after FW ver. 3.27.07.00==
 +
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>
 +
 
 +
'''Beacon Detection'''<br>
 +
* '''''Disabled''''' – Functionality disabled.<br>
 +
* '''''All''''' – All visible beacons are detected (Max. 50).<br>
 +
* '''''Configured''''' – Only beacons from the list are sent to server<br>
 +
 
 +
'''Beacon Mode'''<br>
 +
* '''''Simple''''' – When simple mode is selected beacon parsing is done automatically (Eddystone and iBeacon protocols are supported).<br>
 +
* '''''Advanced''''' – When advanced beacon mode is selected, beacon data capturing can be configured manually.<br>
 +
 
 +
'''Beacon Record'''<br>
 +
* '''''On Change''''' – On change mode - device will not create Beacon record after every scan procedure is completed unless scanned Beacon list will change.<br>
 +
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br>
 +
 
 +
'''Beacon Record Priority''' - Beacon record saving period:
 +
*'''''None''''' - No records will be generated <br>
 +
*'''''Low''''' - Beacon record will be generated and sent once link with the server is established<br>
 +
*'''''High''''' - Beacon record will be generated and sent immediately<br>
 +
 
 +
[[Image:Beacon Settings.PNG|300px|none]]
 +
 
 +
While selecting the '''Beacons Detection''' as '''All''', the device will detect all beacons which are located around the device.
 +
[[Image:All.png|300px|none]]
 +
 
 +
Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List.
 +
[[Image:Configured.png|300px|none]]
 +
 
 +
===Beacon List===
 +
List of authorized beacons. Eddystone and iBeacon protocols are supported*.<br>
 +
 
 +
[[File:Beacon List.PNG|Beacon List]]
 +
<br>
 +
''*''Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts
 +
can be omitted ex., Namespace:. UUID::, UUID::Minor, etc
 +
 
 +
 
 +
There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List. Beacon list limitation is up to 100 beacons.
 +
 
 +
Example of the configured beacons detection in the List.
 +
 
 +
 
 +
Below there is provided the example of the List while using the '''Beacons Detection source as Configured.''' The provided example is showing the configuration for the iBeacon and Eddy-stone.
 +
[[Image:Configured List.png|800px|none]]
 +
 
 +
The Beacons settings are configured as showed. The iBeacon or Eddystone is added to the list with the following structure:
 +
* '''''iBeacon''''' – 20 Bytes (UUDI (16-bytes:major(2-bytes):minor (2-bytes))
 +
* '''''Eddystone''''' – 16B (Namespace (10-bytes):Instance ID(6-bytes))
 +
 
 +
There is a possibility to detect the devices just by UUID or Namespace (see the 2 and 6 elements in the list).
 +
 
 +
Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br />
 +
 
 +
===Beacon On Change===
    
New functionality Beacon On Change has been implemented from '''03.27.04.Rev.01''' firmware version. The purpose of it is to create Beacon records only when there are changes in Beacon List. The New configurable parameter Beacon On Change '''(Parameter ID: 143)''' has been added with two possible settings: Monitoring (0) and On Change (1). When monitoring is selected, Beacon record generating is working as usual. When On Change is selected, Beacon records are generated only when there are changes in the Beacon list.
 
New functionality Beacon On Change has been implemented from '''03.27.04.Rev.01''' firmware version. The purpose of it is to create Beacon records only when there are changes in Beacon List. The New configurable parameter Beacon On Change '''(Parameter ID: 143)''' has been added with two possible settings: Monitoring (0) and On Change (1). When monitoring is selected, Beacon record generating is working as usual. When On Change is selected, Beacon records are generated only when there are changes in the Beacon list.

Navigation menu