46
edits
Changes
Teltonika FMx 640 With TCP Link Mode (view source)
Revision as of 14:45, 21 February 2023
, 14:45, 21 February 2023→Step 2. FMx640 Configuration:
[[File:1 server Fuad.jpg|center|thumb|800x800px|Configuring server sitting|alt=]]
[[File:1 server Fuad.jpg|center|thumb|800x800px|Configuring server sitting|alt=]]
[[File:Configure RS232 Sittings FMC640.jpg|center|thumb|1200x1200px|Configure RS232 Sittings]]
[[File:Configure RS232 Sittings FMC640.jpg|center|thumb|800x800px|Configure RS232 Sittings|alt=]]
Here you have to send acknowledgement after receiving the IMEI from the device. then You have to send 01 as a server response.
Here you have to send acknowledgement after receiving the IMEI from the device. then You have to send 01 as a server response.
[[File:Sending messages with Hercules.jpg|center|thumb|667x667px|Sending messages with Hercules]]
[[File:Sending messages with Hercules.jpg|center|thumb|555x555px|Sending messages with Hercules|alt=]]
You have to choose TCP Server section from the upper menu. In the marked fields.
You have to choose TCP Server section from the upper menu. In the marked fields.
==='''Step 4.''' Receiving messages with Hercules:===
==='''Step 4.''' Receiving messages with Hercules:===
In this step we need to use the terminal log. When you want to send a message from FMx 640 to the server, write it in Terminal but change your com port and select port which is assigned for COM1/COM2.
In this step we need to use the terminal log. When you want to send a message from FMx 640 to the server, write it in Terminal but change your com port and select port which is assigned for COM1/COM2.
[[File:Terminal Log Sending Text.png|center|thumb|1200x1200px|Terminal Log Sending Text]]
[[File:Terminal Log Sending Text.png|center|thumb|800x800px|Terminal Log Sending Text|alt=]]
After doing the mentioned configuration you can type your message in the marked field, check +CR and press Send button. If sent successfully, you will see it in Hercules Received data field.
After doing the mentioned configuration you can type your message in the marked field, check +CR and press Send button. If sent successfully, you will see it in Hercules Received data field.
[[File:Receiving Text From The Terminal to Server Hercules.png|center|thumb|800x800px|Receiving Text from The Terminal to Server Hercules]]
[[File:Receiving Text From The Terminal to Server Hercules.png|center|thumb|600x600px|Receiving Text from The Terminal to Server Hercules|alt=]]
