Changes

no edit summary
Line 8: Line 8:  
==='''Step 2.'''  FMx640 Configuration:===
 
==='''Step 2.'''  FMx640 Configuration:===
   −
The FMx configurator you have to set parameters for COM1 or COM2 (depends on which COM port you are using) in global parameters window. You have to modify the server sittings to you PC IP and your TCP port.  
+
The FMx configurator you have to set parameters for COM1 or COM2 (depends on which COM port you are using) in global parameters window. You have to modify the server sittings to you PC IP and your TCP port.
    
[[File:1 server Fuad.jpg|center|thumb|800x800px|Configuring server sitting|alt=]]
 
[[File:1 server Fuad.jpg|center|thumb|800x800px|Configuring server sitting|alt=]]
Line 21: Line 21:  
'''Note:''' Try to make sure that your TCP Port is open by checking the below websites.  
 
'''Note:''' Try to make sure that your TCP Port is open by checking the below websites.  
    +
===='''2.1.''' Message Timestamp====
 +
 +
Message Timestamp parameter is used to determine if it is necessary to include a timestamp in the RS232 TCP packet when sending it to the server. If the parameter is Enabled, then Codec 13 is used for data sending. Otherwise, Codec 12 is used.
 +
 +
You can also use RS485 which is also suitable for Ascii TCP Link mode. In order to make a link between FMx640 device and server, Domain and Target Server Port have to be set in the working device profile, GPRS data sending Settings section. When the right parameters are set, you can save the configuration to the FMx640 device.
    
==='''Step 3.'''  Establishing FMx test link with server through Hercules and sending messages with Hercule:===
 
==='''Step 3.'''  Establishing FMx test link with server through Hercules and sending messages with Hercule:===
Line 30: Line 35:  
Here you have to send acknowledgement after receiving the IMEI from the device. then You have to send 01 as a server response.
 
Here you have to send acknowledgement after receiving the IMEI from the device. then You have to send 01 as a server response.
   −
[[File:Sending messages with Hercules.jpg|center|thumb|555x555px|Sending messages with Hercules|alt=]]
+
[[File:Sending messages with Hercules.jpg|center|thumb|444x444px|Sending messages with Hercules|alt=]]
    
You have to choose TCP Server section from the upper menu. In the marked fields.
 
You have to choose TCP Server section from the upper menu. In the marked fields.

Navigation menu