157
edits
Changes
no edit summary
Advanced Pulse counter functionality has limitations when pulse is at different duty cycle and signal voltage at 2kHz frequency. Exceeding limitations might lead to unexpected pulse count or even stop functionality from working. Tables below shows those limitations for specific DIN.
Advanced Pulse counter functionality has limitations when pulse is at different duty cycle and signal voltage at 2kHz frequency. Exceeding limitations might lead to unexpected pulse count or even stop functionality from working. Tables below shows those limitations for specific DIN.
Devices on DIN2 support up to 2kHz pulse frequency. Pulses can be with different duty cycles, but only pulses that are greater that 120us is counted, otherwise they are filtered as signal noise. In other words, pulse change between low and high state should not take longer than 120us. Also, there is a pulse rise time that affects time when voltage threshold is reached. So, for 2kHz there is limitations for available duty cycle.
Devices on DIN2 support up to 2kHz pulse frequency. Pulses can be with different duty cycles, but only pulses that are greater that 120us is counted, otherwise they are filtered as signal noise. In other words, pulse change between low and high state should not take longer than 120us. Also, there is a pulse rise time that affects time when voltage threshold is reached. So, for 2kHz there is limitations for available duty cycle.
{| class="wikitable"
!'''Duty Cycle, % =20'''
! colspan="6" |'''DIN2'''
! rowspan="3" |'''Notes'''
|-
! rowspan="2" |'''U, V'''
! colspan="6" |'''Frequency , Hz'''
|-
|30
|50
|100
|500
|1000
|2000
|-
|2.5
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>-</nowiki>
|Min Duty Cycle at 2kHz is ~25%
|-
|6
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>-</nowiki>
|Min Duty Cycle at 2kHz is ~25%
|-
|8
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>-</nowiki>
|Min Duty Cycle at 2kHz is ~25%
|-
|10
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>-</nowiki>
|Min Duty Cycle at 2kHz is ~25%
|-
! colspan="8" |
|-
!'''Duty Cycle, % =50'''
! colspan="6" |'''DIN2'''
! rowspan="3" |'''Notes'''
|-
! rowspan="2" |'''U, V'''
! colspan="6" |'''Frequency , Hz'''
|-
|30
|50
|100
|500
|1000
|2000
|-
|2.5
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|
|-
|6
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|
|-
|8
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|
|-
|10
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|
|-
! colspan="8" |
|-
!'''Duty Cycle, % =80'''
! colspan="6" |'''DIN2'''
! rowspan="3" |'''Notes'''
|-
! rowspan="2" |'''U, V'''
! colspan="6" |'''Frequency , Hz'''
|-
|30
|50
|100
|500
|1000
|2000
|-
|2.5
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>-</nowiki>
|Max Duty Cycle at 2kHz is ~70%
|-
|6
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>-</nowiki>
|Max Duty Cycle at 2kHz is ~70%
|-
|8
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>-</nowiki>
|Max Duty Cycle at 2kHz is ~70%
|-
|10
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>+</nowiki>
|<nowiki>-</nowiki>
|Max Duty Cycle at 2kHz is ~70%
|}
==Advanced pulse counter parameter in configurator==
==Advanced pulse counter parameter in configurator==
