77
edits
Changes
no edit summary
Following sections describe '''Proximity''' and '''Lost & Found''' Scenarios.
Following sections describe '''Proximity''' and '''Lost & Found''' Scenarios.
== Eye Beacon Configuration ==
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
* Transmitting at 2 dBm power.
* Data advertising at 3 second intervals.
* Eddystone protocol
However, these parameters can be changed. Transmitting power can be set from -14dBm to 8dBm – higher transmitting power equates to a larger beacon range. Data advertising interval can be selected from the range 20ms to 10s, shorter data advertising intervals ensure a more stable signal. However, increasing power or reducing the advertising interval affects the battery life of the Eye Beacon.
{| class="wikitable"
|+
|'''EYE Beacon / BTSID1'''
|'''EYE Sensor / BTSMP1'''
|-
|2+ years
(Tx=2 dBm; interval: 1 s)
|1+ year
(Tx=2 dBm; interval: 1 s)
|-
|5+ years
(Tx=2 dBm; interval: 3 s)
|2.5+ years
(Tx=2 dBm; interval: 3 s)
|-
|8+ years
(Tx=2 dBm; interval: 5 s)
|4+ years
(Tx=2 dBm; interval: 5 s)
|-
|10+ years
(Tx=2 dBm; interval: 10s)
|5+ years
(Tx=2 dBm; interval: 10s)
|}
More information can be found [[EYE FAQ#Questions%20about%20FMBxxx%20compatibility%20with%20EYE%20Accessories.|here]] All configuration of the Eye Beacon will be done via [[EYE BEACON / BTSID1#EYE%20App%20Configuration|EYEapp.]] On the app, wanted protocol can be selected, transmitting power, advertising interval and Beacon ID can be easily configured. Below is an example configuration.
[[File:Eye Beacon configuration.gif|center|frameless]]
== Configuration ==
== Configuration ==
We need to set up proper Protocol and Bluetooth settings in order to have beacons information
We need to set up proper Protocol and Bluetooth settings in order to have beacons information
# In System Settings Enable [[Codec#Codec%208%20Extended|Codec8 Extended]];
# In System Settings Enable [[Codec#Codec%208%20Extended|Codec8 Extended]].
# In [[FMB120 Bluetooth® settings|Bluetooth®]] settings Enable Bluetooth®, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth® will be disabled;
# In [[FMB120 Bluetooth® settings|Bluetooth®]] settings Enable Bluetooth®, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth® will be disabled.
=== Proximity Scenario ===
=== Proximity Scenario ===
