Changes

no edit summary
Line 271: Line 271:  
| This usually occurs when the device tries making OBD requests while the vehicle has no ignition and is locked. This can happen due to improper configuration, so make sure that the OBD device properly detects the ignition of the vehicle, when the ignition is actually ON.
 
| This usually occurs when the device tries making OBD requests while the vehicle has no ignition and is locked. This can happen due to improper configuration, so make sure that the OBD device properly detects the ignition of the vehicle, when the ignition is actually ON.
 
More information about the Ignition sources can be found here: [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Ignition_Source Ignition source]
 
More information about the Ignition sources can be found here: [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Ignition_Source Ignition source]
 +
|}
 +
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Why does my device keep sending the same coordinates even if the vehicle is moving? </strong>
 +
|-
 +
|This is usually caused by the Static Navigation feature being misconfigured in the System settings.
 +
The static navigation feature allows us to filter out false GNSS position changes when the vehicle is stationary and show only the true location of the vehicle.
 +
 +
 +
The filtering can be disabled by configured movement or ignition source - if they are incorrectly configured, the device will not only incorrectly detect vehicle movement state or ignition, but also will not disable the filtering, causing the records to be sent with the same coordinates.
 +
 
|}
 
|}

Navigation menu