137
edits
Changes
→Records settings
[[File:FTC record settings.png|right|500 px]]
[[File:FTC record settings.png|right|500 px]]
'''Saving / sending mode'''
'''Saving/sending mode'''
This feature will be used to save and send records to server without time sinchronization.
This feature will be used to save and send records to the server without time synchronization.
'''Possible options:'''
'''Possible options:'''
''After Position Fix'' - records will be saved and send only after position fix
''After Position Fix'' - records will be saved and sent only after position fix.
''After Time Sync'' - records will be saved and send only after time synchronization
''After Time Sync'' - records will be saved and sent only after time synchronization.
''Always'' - records will be always saved and send even if will not be time synchronization
''Always'' - records will always be saved and sent even if there is no time synchronization.
Note: If record is without valid coordinates – (there were no GPS fix in the moment of data acquisition) – Longitude, Latitude and Altitude values are last valid fix, and Angle, Satellites and Speed are 0. After a reboot, it will send zero coordinates.
Note: If the record is without valid coordinates – (there were no GPS fix at the moment of data acquisition) – Longitude, Latitude and Altitude values are sent as per the last valid fix, and Angle, Satellites and Speed will be 0. However, if there is a reboot then it will send zero coordinates.
'''Sort by'''
'''Sort by'''
Can be set either Newest or Oldest. For example if the Oldest is marked the device first will send the Oldest information, if Newest then Device will send the newest information. If the device had no connection (GSM or GPRS) due to bad coverage or being in an area with no signal. Device continues to save records into internal memory, once GSM and GPRS are recovered device will start sending saved data to server. In this example, if Oldest is configured - until newest data is seen on the server all of the oldest records have to be sent first. If Newest is configured - previous data and track won't be seen until newest data is sent first. If high priority on I/O parameters or Features are configured device will send the generated records with High Priority first.
Can be set either Newest or Oldest. For example, if the Oldest is marked the device first will send the Oldest information, if the Newest is marked, the device will send the newest information. Suppose the device had no connection (GSM or GPRS) due to bad coverage or being in an area with no signal. The device continues to save records into internal memory, once GSM and GPRS are recovered, the device will start sending saved data to the server. In this example, if Oldest is configured - until the newest data is seen on the server all of the oldest records have to be sent first. If Newest is configured - previous data and track won't be seen until the newest data is sent first. If high priority on I/O parameters or Features is configured device will send the generated records with High Priority first.
'''Data protocol'''
'''Data protocol'''