Difference between revisions of "TAT240 Stable firmware"

From Wiki Knowledge Base | Teltonika GPS
Line 19: Line 19:
  
 
|fw_head= STABLE FIRMWARE
 
|fw_head= STABLE FIRMWARE
−
|firmware_ver= 55.00.16.Rev.564
+
|firmware_ver= 55.00.16.Rev.569
−
|configurator_ver= 1.7.74_B.TAT1_R.6
+
|configurator_ver= 1.7.74_E.TAT1_R.41
−
|Bluenrg_ver= 0.4.12
+
|Bluenrg_ver= 1.0.3.Rev.00
−
|Release_date= 2024.03.12
+
|Release_date= 2024.08.19
−
|FW_DL=55.00.16.Rev.564 Firmware & BlueNRG for TAT.zip
+
|FW_DL=55.00.16.Rev.564 Firmware & 1.0.3.Rev.00 BlueNRG.zip
−
|CF_DL=Teltonika.Configurator_TAT_1.7.74_B.TAT1_R.6.zip
+
|CF_DL=Teltonika.Configurator_TAT_1.7.74_E.TAT1_R.41.zip
−
|DL_ALL=55.00.16.Rev.564 Firmware, BlueNRG & configurator for TAT.zip
+
|DL_ALL=55.00.16.Rev.569 Firmware, 1.0.3.Rev.00 BlueNRG & Configurator.zip
  
 
}}
 
}}

Revision as of 09:28, 22 August 2024

Main Page > Autonomous Trackers > TAT240 > TAT240 Firmware and configurator > TAT240 Stable firmware


Warning.png CAUTION!
Both firmwares (Modem and BlueNRG) must be flashed into device. Failing so can lead to unexpected device behavior and rapid battery discharge.
TAT240 BlueNRG & Modem FIRMWARE UPDATE GUIDE
TATXYZ FIRMWARE UPDATE GUIDE

Download Firmware and Configurator from STABLE FIRMWARE or SHORT-TERM FIRMWARE pages.

After device connection to Configurator:
1) Select Update firmware;
2) Select to flash Firmware(*.e.XIM) file;
3) Click on file;
4) And select Open.

Wait until the device will upload the firmware.

TAT100Firmware.png

When parameters successfully loaded:
1) Select Update firmware;
2) Select to flash BlueNRG firmware(*.bin);
3) Click on file;
4) And select Open.

TAT100NRG.png

TAT240 Stable Firmware and Software

STABLE FIRMWARE
FIRMWARE VERSION: 55.00.16.Rev.569
CONFIGURATOR VERSION: 1.7.74_E.TAT1_R.41
BlueNRG VERSION: 1.0.3.Rev.00
RELEASE DATE:
 2024.08.19
DOWNLOAD
Firmware & BlueNRG for [TAT240]
Firmware & BlueNRG for [TAT100 HW31]
Firmware & BlueNRG for [TAT100 HW62]
Configurator
DOWNLOAD ALL
DOWNLOAD ALL FOR [TAT240]
DOWNLOAD ALL FOR [TAT100 HW31]
DOWNLOAD ALL FOR [TAT100 HW62]
Backup FMB Firmware
On request via Teltonika HelpDesk

CHANGELOG

VERSION RELEASE DATE CONFIGURATOR CHANGES FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.569

BlueNRG version: 1.0.3.Rev.00
Configurator version: 1.7.74_E.TAT1_R.7

2024.08.19
  • Added an option to configure TLS functionality.
  • Added an option to configure SMS record sending.
  • Added an option to configure MQTT Azure and AWS support.
  • Added an option to configure I am alive feature.
  • Added an option to configure SMS alert on Tamper event.
  • Added SMS alert on Tamper event feature.
  • Fixed X, Y and Z IO elements not being included with First Power On record.
  • Extended On Stop and On Move periodic timers to maximum value of 7 days.
  • Improvements to Static Navigation logic in no GPS situation.
  • New AVL ID 69 value added (4 - no GPS in Static Navigation).
  • Improved Recovery mode trigger logic in Lost Sensor scenario.
  • Added error code when BLE sensor is lost.
VERSION RELEASE DATE CONFIGURATOR CHANGES FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.564
BlueNRG version: 0.4.12
Configurator version: 1.7.74_B.TAT1_R.6 		2024.03.12
  • No changes
  • Fixed periodic timer starting in Recovery mode.
  • Improved backup tracker scan procedure.
Firmware version: 55.00.16.Rev.562
BlueNRG version: 0.4.11
Configurator version: 1.7.74_B.TAT1_R.6 		2023.12.20
  • Initial release
  • Initial release
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=TAT240_Stable_firmware&oldid=100085"