TAT240 Stable firmware: Difference between revisions

Revision as of 11:18, 5 September 2024

Main Page > Autonomous Trackers > TAT240 > TAT240 Firmware and configurator > TAT240 Stable firmware

CAUTION!
Both firmwares (Modem and BlueNRG) must be flashed into device. Failing so can lead to unexpected device behavior and rapid battery discharge.

TAT240 BlueNRG & Modem FIRMWARE UPDATE GUIDE

TATXYZ FIRMWARE UPDATE GUIDE

Download Firmware and Configurator from STABLE FIRMWARE or SHORT-TERM FIRMWARE pages.

After device connection to Configurator:
1) Select Update firmware;
2) Select to flash Firmware(*.e.XIM) file;
3) Click on file;
4) And select Open.

Wait until the device will upload the firmware.

When parameters successfully loaded:
1) Select Update firmware;
2) Select to flash BlueNRG firmware(*.bin);
3) Click on file;
4) And select Open.

TAT240 Stable Firmware and Software

STABLE FIRMWARE
FIRMWARE VERSION:	55.00.16.Rev.569
CONFIGURATOR VERSION:	1.7.74_E.TAT1_R.7
BlueNRG VERSION:	1.0.3.Rev.00
RELEASE DATE:	2024.08.19

DOWNLOAD

Firmware & BlueNRG for [TAT240]

Configurator

DOWNLOAD ALL

DOWNLOAD ALL FOR [TAT240]

Backup FMB Firmware

On request via Teltonika HelpDesk

CHANGELOG


VERSION	RELEASE DATE	CONFIGURATOR CHANGES	FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.571 BlueNRG version: 1.0.4.Rev.02 Configurator version: 1.7.74_B.TAT1_R.8	2025.02.11	None	Fixed an issue where the device got stuck with an open link and failed to go to sleep in an edge case. Ported GPRS Authentication for Quectel modems. Minor improvements on the modem and BlueNRG firmware.


VERSION	RELEASE DATE	CONFIGURATOR CHANGES	FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.569 BlueNRG version: 10.0.3.Rev.00 Configurator version: 1.7.74_E.TAT1_R.7	2024.08.19	Added an option to configure TLS functionality. Added an option to configure SMS record sending. Added an option to configure MQTT Azure and AWS support. Added an option to configure I am alive feature.	Added TLS functionality feature. Added SMS record sending feature. Added MQTT Azure and AWS support. Added I am alive feature. Fixed X, Y and Z IO elements not being included with First Power On record. Extended On Stop and On Move periodic timers to maximum value of 7 days. Improvements to Static Navigation logic in no GPS situation. New AVL ID 69 value added (4 - no GPS in Static Navigation). Improved Recovery mode trigger logic in Lost Sensor scenario. Added error code when BLE sensor is lost.


VERSION	RELEASE DATE	CONFIGURATOR CHANGES	FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.564 BlueNRG version: 0.4.12 Configurator version: 1.7.74_B.TAT1_R.6	2024.03.12	No changes	Fixed periodic timer starting in Recovery mode. Improved backup tracker scan procedure.
Firmware version: 55.00.16.Rev.562 BlueNRG version: 0.4.11 Configurator version: 1.7.74_B.TAT1_R.6	2023.12.20	Initial release	Initial release

@@ Line 20: / Line 20: @@
 |fw_head= STABLE FIRMWARE
 |firmware_ver= 55.00.16.Rev.569
-|configurator_ver= 1.7.74_E.TAT1_R.41
+|configurator_ver= 1.7.74_E.TAT1_R.7
 |Bluenrg_ver= 1.0.3.Rev.00
 |Release_date= 2024.08.19
-|FW_DL=55.00.16.Rev.564 Firmware & 1.0.3.Rev.00 BlueNRG.zip
+|FW_DL=55.00.16.Rev.569 Firmware & 1.0.3.Rev.00 BlueNRG.zip
-|CF_DL=Teltonika.Configurator_TAT_1.7.74_E.TAT1_R.41.zip
+|CF_DL=Teltonika.Configurator_TAT_1.7.74_E.TAT1_R.7.zip
 |DL_ALL=55.00.16.Rev.569 Firmware, 1.0.3.Rev.00 BlueNRG & Configurator.zip