Jump to content
  • EN

Template:FMX Professional Trackers Firmware Changelog: Difference between revisions

From Teltonika Telematics Wiki
← Older editNewer edit →
VisualWikitext
No edit summary
No edit summary
Line 2,611: Line 2,611:


| FMC225 =  
| FMC225 =  
===Introduction===
We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />
This document describes '''FMBXXX, FMCXXX, FMUXXX, FMMXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.


<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:20%; vertical-align: middle; text-align: center;">FIRMWARE VERSION</th>
<th style="width:20%; vertical-align: middle; text-align: center;"> </th>
<th style="width:60%; vertical-align: middle; text-align: center;">HARDWARE</th>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.29.00.Rev.157'''</td>
<td style="vertical-align: middle"> </td>
<td style="text-align: left; vertical-align: top">FMB150, FMC150, FMM150, FMC250, FMM250</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.29.00.Rev.932'''</td>
<td style="vertical-align: middle"> </td>
<td style="text-align: left; vertical-align: top">FMB965, FMB930</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.29.00.Rev.554'''</td>
<td style="vertical-align: middle"> </td>
<td style="text-align: left; vertical-align: top">FMP100, FMB020</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.29.00.Rev.263'''</td>
<td style="vertical-align: middle"> </td>
<td style="text-align: left; vertical-align: top">FMB209</td>
</tr>
</table>
===Firmware versioning===
*Structure
FMB(T).VER.[<code>XX</code>].[<code>YY</code>].[<code>ZZ</code>].Rev.[<code>##</code>] _[<code>ID###</code>]
*Syntax description
**<code>XX</code> – major FW version.
**<code>YY</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.
**<code>ZZ</code> – major changes like bigger fixes, improvements and new features addition.
**<code>##</code> – minor changes like small fixes and improvements.
**<code>ID[###]</code> – Spec ID KEY – Specific clients FW changes.
===Firmware versions===
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:20%; vertical-align: middle; text-align: center; border-bottom: 2px solid #0054A6; color: #0054A6;">FIRMWARE VERSION</th>
<th style="width:20%; vertical-align: middle; text-align: center; border-bottom: 2px solid #0054A6; color: #0054A6;">RELEASE DATE</th>
<th style="width:60%; vertical-align: middle; text-align: left; border-bottom: 2px solid #0054A6; color: #0054A6;">CHANGES</th>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;">'''04.00.00.Rev.14'''<br /> (recommended for FMC920, FMC880, FMC800)</td>
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;"> 2025.07.01</td>
<td style="text-align: left; vertical-align: top; border-bottom: 2px solid #E8E8E8;">
<ul>
<li>Corrected an issue in the factory test procedure where the modem on Quectel EG915U-based devices failed to recover the correct baud rate, causing delayed startup</li>
</ul>
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;">'''04.00.00.Rev.13'''<br /> (recommended for FMB900, FMB910, FMB920, FMC920, FMM920, FMT100, FMC880 (Quectel EG915U-EU), FMM880, FMC800, FMM800, FMB110, FMB120, FMB130, FMB202, FMB204, FMB230, FMC130 (MeiG SLM320-PE2C, SLM320-PE2H, SLM320-L16A, SLM320-L16B), FMC230, FMC234, FMM130 (Quectel BG95-M3), FMM230, FMB125, FMC125 (MeiG SLM320-PE2C, SLM320-PE2H, SLM320-L16A, SLM320-L16B), FMC225, FMB140)</td>
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;"> 2025.05.26</td>
<td style="text-align: left; vertical-align: top; border-bottom: 2px solid #E8E8E8;">
<ul>
<li>'''NEW!''' <span style="color: yellow;">[[Major_version_update_to_4.0.0|Major version updated to 4.0.0 and downgrade protection added]]</span></li>
<li>'''NEW!''' Added support for [[FMC880|FMC880]], [[FMM880|FMM880]]</li>
<li>'''NEW!''' Added support for [[FMC800|FMC800]], [[FMM880|FMM800]], [[FMM80A|FMM80A]]</li>
<li>'''NEW!''' Added support for [[FMC234|FMC234]]</li>
<li>'''NEW!''' Modem recovery mechanism to address modem hangs resulting from network issues or poor signal conditions</li>
<li>'''NEW!''' Implemented support for encrypted CAN commands over Bluetooth</li>
<li>'''NEW!''' Enhanced “Advanced Unplug Detection” with additional condition options for speed and delay</li>
<li>'''NEW!''' Added Beacon option for “Authorized Read Notification” feature</li>
<li>'''NEW!''' Added Dynamic Ground vector feature for more accurate accelerometer data</li>
<li>'''NEW!''' Added “Window state” security state flag elements</li>
<li>'''NEW!''' Enabled devices to send records to a duplicate server via TCP in Codec JSON, while the primary server uses MQTT with TLS encryption</li>
<li>'''NEW!''' Enabled “Driving state” and “Driving records” I/O elements for FMC880/FMM880 devices</li>
<li>'''NEW!''' Added a DIN3 option as a trigger for outgoing calls in HF settings</li>
<li>'''NEW!''' Added "set calibration" command</li>
<li>'''NEW!''' Added a new GNSS I/O status value '4' - GNSS ON with an active GNSS filter.</li>
<li>'''NEW!''' “Stay Awake” parameter option added for “Sleep Mode”</li>
<li>'''NEW!''' “DTC Request on Engine Start” feature to avoid conflicts with external diagnostic equipment</li>
<li>'''NEW!''' Added support of PCB temperature I/O element for devices with NTC</li>
<li>'''NEW!''' Added support for TCP BIN/ASCII data forwarding in JSON CODEC format</li>
<li>'''CHANGED!''' Default logging filters updated</li>
<li>'''CHANGED!''' Unplug detection events are allowed to be sent before device going to Low Power Mode</li>
<li>'''CHANGED!''' Adjusted accelerometer sensitivity to be more suitable for crash detection</li>
<li>'''CHANGED!''' Set GNSS jamming DOUT control to a higher priority over maintenance DOUT</li>
<li>'''CHANGED!''' Modifications to calibration algorithm for greater accuracy</li>
<li>'''CHANGED!''' BLE Advertising period changed to 500 ms</li>
<li>'''CHANGED!''' Refactored the Immobilizer Authorized ID checking feature</li>
<li>'''CHANGED!''' Conditions when device operation is prohibited updated</li>
<li>'''CHANGED!''' Adjusted the operator ban list logic to have a search timeout of 5 minutes and a ban time of 30 minutes</li>
<li>'''CHANGED!''' Incremental retry periods for AGPS EPO download to improve successful download time period</li>
<li>'''CHANGED!''' Program number parameter ID 11120 size increased and max value to 99999</li>
<li>'''CHANGED!''' Additional traces for GPS and GSM jamming status in device log</li>
<li>'''CHANGED!''' Enabled band 26 selection for devices equipped with Quectel BG95-M3 modems</li>
<li>Adjusted battery percentage table for FMC234</li>
<li>Corrected the limit connections management in Low Power Mode</li>
<li>Resolved issue where MCC calculation was done incorrectly forcing device to enter blocked state</li>
<li>DualSIM switching process speed adjusted for devices with MeiG modems</li>
<li>Improved socket status reading for BG9X modems to correcly handle data sending if socket is closed</li>
<li>Corrected the byte inversion issue in 1-Wire Matrix (ReadROM) ID parsing</li>
<li>Device abnormal working with dynamic bt name when using value of 16 characters with %imei function resolved</li>
<li>Addressed issues where the device behaved abnormally after receiving a #FWD DAT command with the target set to Bluetooth and a NULL payload</li>
<li>Fine-tuned the parsing for start and end delimiters in RS232 Delimiter mode to enhance functionality</li>
<li>Fixed an issue where high priority records were not sent if a call was triggered by a feature activation</li>
<li>Resolved an issue where link was not close properly sometimes after sending a record in Low Power Mode</li>
<li>Enhanced the retry mechanism for SIM PIN entries if the initial attempt was unsuccessful</li>
<li>Adjusted the saving of the Digital Output state post-firmware update when the inverted mode is selected</li>
<li>Enabled missing CAN RSF parameters</li>
<li>Resolved unexpected wake-ups from sleep due to repeated time-sync issues and server failures to close sockets correctly</li>
<li>Patched the fail count algorithm for 1-wire data reading to improve stability</li>
<li>Disallowed GSM updates during server response wait periods to prevent duplicate record sending in online deep sleep mode</li>
<li>Removed disallowed MCCs (250, 257, 432, 368, 467) from the APN list</li>
<li>Improved parsing of VIN and Trailer VIN values</li>
<li>Resolved EYE Sensor filtering issue by MAC or Name when configuration parameter “Identifier” was changed</li>
<li>Resolved an issue where UL202 record value was incorrectly parsed in device logs</li>
<li>Changed the BLE advanced data offset type to signed to correct inaccuracies when negative offsets were used</li>
<li>Updated the DOUT control from the Ignition FSM to prevent feature bypass when switching ignition on and off within 1 second</li>
<li>Adjusted the conversion of EYE "Major" and "Minor" values, ensuring data is packed according to Bigger Endian format when "Lost&Found" record are generated</li>
<li>Corrected a typographical error in the lvcangetinfo response</li>
<li>Resolved an issue where the device was unable to enter sleep mode due to an NTP sync being stuck</li>
<li>Fixed an issue where the first GPRS command was ignored after the device connected to a Backup Server</li>
<li>Resolved an issue where DTC fault codes were not correctly packed into records for some EV and Hybrid vehicles</li>
<li>Improved SIM switch logic in devices equipped with Quectel modems</li>
<li>Removed an unnecessary filter for the instant movement element status</li>
<li>Resolved an issue where private/business mode was not functioning according to the weekly schedule</li>
<li>Improved device stability when NMEA logging is enabled via RS232 at 9600 baud</li>
<li>Enhanced device stability when a 2kHz signal is detected by the device using "Advanced Pulse Counter" feature</li>
<li>Resolved an issue where 2G devices could not open a socket for a period after disconnecting from the network due to poor network conditions</li>
<li>Resolved an issue where duplicate records were created if UART communication with the modem stopped working while the device was in GNSS/ODS sleep mode and USB was connected</li>
<li>Improved the handling of the socket closing for devices with MeiG modules when TLS and Deep Sleep are used</li>
<li>Improved the stability of OBD dongle data reading after a Bluetooth module restart</li>
<li>Resolved an issue where the device would sometimes fully wake up from Deep Sleep due to periodic record sending</li>
<li>Resolved an issue where the "Advanced Pulse Counter" parameter ID 145 would not reset to default settings via configurator</li>
<li>Resolved an issue where EYE Beacon flag 27 data voltage and temperature values was not included not into record when "Beacon Simple" mode was used</li>
<li>Improved the accuracy of device tracking location in "Low Power Mode"</li>
<li>Resolved an issue where the getinfo response was split into several SMS messages</li>
<li>Improved device stability when Private Mode is triggered by Virtual DIN2</li>
<li>Resolved an issue where firmware downloads would interrupt frequent record sending for devices with MeiG modules</li>
<li>EYE sensors status are now shown correctly in device logs</li>
<li>Resolved an issue where on random cases, a trip end event was received with the trip odometer already reset to 0</li>
<li>Adjusted so that the movement off timeout would not reset after device restart</li>
<li>Disabled unnecessary tasks to decrease current consumption in UDS mode</li>
<li>Resolved an issue where the WD counter was not functioning as expected in ODS mode</li>
<li>Reduced the delay for Immobilizer activation after waking up from sleep</li>
<li>Resolved an issue where the GNSS module would not return to operation after being jammed</li>
<li>Resolved an issue where the program number could not be changed sometimes with an SMS command</li>
<li>Applied a patch to support APDU commands, preventing connectivity issues when the device uses specific SIMs and crosses borders</li>
<li>Ensured odometer values are saved after a fix loss to prevent resetting when the device powers off</li>
<li>Applied a patch so that timestamps in crash traces are calculated relative to the crash event, preventing trace damage if a time jump occurs during a crash</li>
<li>Applied a patch to improve Bluetooth interface stability when detecting a large number of Beacons</li>
<li>Resolved an issue where the "On-Demand Tracking", "Activation By" parameter ID 10992 would not reset to default via configurator</li>
<li>Resolved an issue where EYE sensor I/O values would be included in the record even if the "Working Mode" parameter was configured as "Disabled"</li>
<li>Movement will be accurately detected after the movement detection delay period, and not simultaneously with towing detection when it is activated</li>
<li>Resolved an issue where the Immobilizer would not retrigger the Digital output immediately if the ignition was turned on for shorter than 1 second</li>
<li>Adjusted the btgetlist 3 command to return a full scanned object list</li>
<li>Resolved an issue where the "Odometer Calculation Source" parameter ID 11806 did not reset back to the default value when the configuration was reset</li>
<li>Resolved an issue where Beacon info remained visible in the configurator UI even when detection was disabled</li>
<li>Resolved an issue where the TTFF (Time to First Fix) result was sometimes reported as 0 even though a fix was acquired</li>
<li>Resolved an issue where the Digital Output was not activated by the "Immobilizer" scenario when the "Ignition Off timeout" was set to longer than the "Sleep Timeout"</li>
<li>Implemented a minor interface control tweak for 1-wire interface stability</li>
<li>Removed unnecessary spam from device log prints</li>
<li>Corrected the behavior to stop advertising BLE packets once a connection is established</li>
<li>Resolved an issue where the device's 1-Wire interface functioned incorrectly if the 1-Wire in Sleep mode parameter value changed while the device was in sleep mode</li>
<li>Resolved an issue where fake movement was detected due to incorrect GNSS speed data acquired from the GNSS module</li>
<li>Tweaked the BLE GATTS disconnect process to enable correct disconnection</li>
<li>Resolved an issue where devices in Deep Sleep mode would sometimes fail to report the disconnected status using MQTT</li>
<li>Resolved an issue where devices with MeiG modules would repeat a call after the first one was rejected</li>
<li>Resolved an issue where the Authorization ID List check by Beacon could not be configured for FMX1XY devices</li>
<li>Inverted DOUT state no longer resets after a soft reset</li>
<li>Resolved an issue where movement delay was not resetting correctly if the movement state changed</li>
<li>Device external module startup time improved when waking from ODS</li>
<li>Resolved an issue where logging to dump would stop after a soft reset.</li>
<li>Resolved an issue where the FMX880 device would lose fix for a short amount of time</li>
<li>Adjusted Watchdog behavior when the device is still connected to a network operator</li>
<li>Beacon record generation now properly waits for the Bluetooth stabilization period</li>
<li>Resolved an issue where devices with a Quectel module would save an incorrect timestamp when waking from GNSS sleep mode</li>
<li>Resolved an issue where entering the Features paragraph in the configurator sets a new value for parameter 11703</li>
<li>SIM detection and reading time improved for devices with Quectel BG95-M3 modules</li>
<li>Improved battery percentage reading for FMB204 devices</li>
<li>Adjusted communication with AG3335 to fix issues where FMX880 devices would sometimes take a longer period to acquire a GNSS fix</li>
<li>Resolved an issue where the modem was not starting as expected when the device initiated record sending in Low Power mode</li>
</ul>
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;">'''03.29.00.Rev.21'''<br /> (recommended for FMB122, FMB125, FMM125, FMC125 (SLM320-LA, SLM320-E2, EC21-EC), FMC225, FMC920)</td>
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;"> 2024.08.07</td>
<td style="text-align: left; vertical-align: top; border-bottom: 2px solid #E8E8E8;">
<ul>
<li>Optimized the startup process of the network modules to improve pass-rate during manufacturing testing.</li>
<li>Dual SIM switching enhancements to improve pass-rate during manufacturing testing.</li>
<li>Return real SIM slot for factory testing commands.</li>
</ul>
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;">'''03.29.00.Rev.18'''<br /> (recommended for FMT100, FMB900, FMB910, FMB920, FMC920, FMM920, FMB110, FMB120, FMB122, FMB130, FMC130 (SLM320-LA, SLM320-E2, EC21-EC, EC21-AU), FMC13A, FMM130 (BG95-M3, BG96), FMM13A, FMB202, FMB204, FMB206, FMB230, FMC230, FMM230, FMB140, FMB240, FMB125, FMC125 (SLM320-LA, SLM320-E2, EC21-EC), FMM125 (BG95-M3), FMB225, FMC225)</td>
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;"> 2024.05.13</td>
<td style="text-align: left; vertical-align: top; border-bottom: 2px solid #E8E8E8;">
<ul>
<li>Improved reconnection to new operator time if GPRS was unavailable with initial operator</li>
<li>Fixed pro-longed reconnection to new operator due to record tasks interrupting operator search</li>
<li>Fixed network session closing when current operator is added to blacklist</li>
<li>Improved module initialization time for devices with Quectel modems</li>
<li>Fixed Digital Output state restore after firmware update</li>
<li>RS232 interface stability improvements</li>
<li>GNSS status element state improvements</li>
<li>Time synchronization improvements</li>
<li>Manufacture testing improvements</li>
</ul>
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;">'''03.29.00.Rev.14'''<br /> (recommended for FMB120, FMB130, FMB140, FMB125, FMM130 with BG95-M3, FMM230, FMB920, FMT100, FMB910, FMB204, FMC125 with MeiG SLM320, FMC225, FMC13A)</td>
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;"> 2023.12.13</td>
<td style="text-align: left; vertical-align: top; border-bottom: 2px solid #E8E8E8;">
<ul>
<li>'''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon and EYE Sensor easy configuration]]''' functionalities added</li>
<li>'''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon Lost & Found and Proximity Event]]''' functionalities added</li>
<li>'''NEW!''' '''[[Secure_vehicle_disabling|SECO]]''' functionality added</li>
<li>'''NEW!''' '''[[{{{name|}}}_Bluetooth_4.0_settings#Backup_Tracker|Back-Up Tracker]]''' functionality added</li>
<li>'''NEW!''' '''[[{{{name|}}}_Features_settings#GNSS_Jamming|GNSS jamming]]''' functionality added</li>
<li>'''NEW!''' '''[[{{{name|}}}_System_settings#Low_Power_Mode|Low Power Mode]]''' functionality added</li>
<li>'''NEW!''' MQTT support for '''[[Getting_Started_with_AWS_IoT_Core|AWS IoT Shadow/Custom]]''' and '''[[Getting_started_with_Azure_IoT_hub|Azure IoT]]''' added</li>
<li>'''NEW!''' '''[[FMC125_RS-232_and_RS-485|RS485 Buffered]]''' functionality added</li>
<li>'''NEW!''' '''[[FMC125_RS-232_and_RS-485|RS232 Delimiter mode]]''' functionality added</li>
<li>'''NEW!''' '''[[{{{name|}}}_System_settings#The_1-wire_enabled_in_DS_and_ODS|1-Wire interface control in sleep modes]]''' functionality added</li>
<li>'''NEW!''' '''[[{{{name|}}}_System_settings#BT.2FBLE_module_OFF_during_Sleep_modes|BT/BLE interface control in sleep modes]]''' functionality added</li>
<li>'''NEW!''' '''[[NBL-2|NBL-2 Bluetooth RFID reader]]''' support added</li>
<li>'''NEW!''' SMS/GPRS command '''[[FMB_lvcanhorn|"lvcanhorn"]]''' support added</li>
<li>'''NEW!''' Added support for '''[[FMC13A|FMC13A]]''' and '''[[FMM13A|FMM13A]]'''</li>
<li>'''NEW!''' Added support for '''[[FMC00A|FMC00A]]''' and '''[[FMM00A|FMM00A]]'''</li>
<li>'''NEW!''' Added support for '''[[FMC920|FMC920]]''' and '''[[FMM920|FMM920]]'''</li>
<li>'''NEW!''' Added support for '''[[FMC003|FMC003]]''' and '''[[FMM003|FMM003]]'''</li>
<li>'''NEW!''' Added support for small OBD devices '''[[FMB003|FMB003]]''' and '''[[FMB020|FMB020]]'''</li>
<li>'''NEW!''' Added support for FMC1XY/FMC2XY devices with MeiG modems</li>
<li>'''NEW!''' SMS/GPRS command '''[[FMB_setigndigout|"setigndigout"]]''' added</li>
<li>'''NEW!''' Jamming feature support added for FMC1XY/FMC2XY devices with MeiG modems</li>
<li>'''NEW!''' Support of new electric vehicle '''[[{{{name|}}}_Parameter_list#OBD_II_.28Bluetooth.29|OEM parameters]]''' for FMX00X devices</li>
<li>'''NEW!''' '''[[{{{name|}}}_Parameter_list#LVCAN|CAN service and LPG I/O elements]]''' added</li>
<li>'''NEW!''' New I/O elements for each CAN adapter state flag added</li>
<li>'''NEW!''' New I/O Digital Input 2 for FMX920, FMB910 and FMB900 devices</li>
<li>'''CHANGED!''' Reworked recalibration logic</li>
<li>'''CHANGED!''' '''[[Parameters_Update|Default parameter values]]'''</li>
<li>'''CHANGED!''' '''[[{{{name|}}}_SMS_events|SMS Event]]''' logic reworked</li>
<li>'''CHANGED!''' '''[[FMC125_RS-232_and_RS-485#LLS_mode|LLS address]]''' count expanded to 16</li>
<li>'''CHANGED!''' Black list functionality reworked</li>
<li>'''CHANGED!''' SMS/GPRS command '''[[FMB_cpureset|"cpureset"]]''' protection functionality</li>
<li>'''CHANGED!''' '''[[Advanced_Pulse_Counter|Pulse Counter]]''' reworked</li>
<li>1-Wire Temperature sensor stability improvements</li>
<li>Operator search procedure functionality improvements</li>
<li>Record saving and sending improvements</li>
<li>DOUT state saving improvements</li>
<li>GPRS Session and PDP Context Activation logic improvements</li>
<li>Trip state saving improvements</li>
<li>CAN data reading improvements</li>
<li>BLE data reading stability improvements</li>
<li>TimeSync, SMS handling and connection stability improvements for FMC1XY/FMC2XY devices with MeiG modems</li>
<li>AutoAPN multiple block file improvement for larger database capacity</li>
<li>Manufacture testing improvements</li>
<li>Improved system stability and fixed general bugs</li>
</ul>
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;">'''03.27.13.Rev.443'''<br /> (recommended for FMC225 with SLM320-LA, SLM320-E2)</td>
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;"> 2023.03.14</td>
<td style="text-align: left; vertical-align: top; border-bottom: 2px solid #E8E8E8;">
<ul>
<li>Fixed eSIM detection with SLM320 modules</li>
<li>Improved SMS handling with SLM320 modules</li>
<li>Fixed known issues with GPS jumps and time synchronization</li>
<li>Improved PAP/CHAP authentication</li>
<li>Fixed duplicate server issue when one of server is closed</li>
<li>Improved communication with SLM320 module to ensure stable connection</li>
<li>Improved system stability and fixed general bugs</li>
</ul>
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;">'''03.27.13.Rev.03'''<br /> (recommended for FMB230, FMB225, FMB240, FMM230)</td>
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;"> 2022.09.12</td>
<td style="text-align: left; vertical-align: top; border-bottom: 2px solid #E8E8E8;">
<ul>
<li>Improved system stability and fixed general bugs</li>
<li>Manufacture testing improvements</li>
</ul>
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;">'''03.27.13.Rev.57'''<br /> (recommended for FMC225)</td>
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;"> 2022.05.11</td>
<td style="text-align: left; vertical-align: top; border-bottom: 2px solid #E8E8E8;">
<ul>
<li>Added SMS via LTE support for hardware`s with SLM320 modules</li>
<li>Added [[FMC225_Features_settings#Jamming| '''Jamming support''']] for FMC225 hardware</li>
<li>Fixed NITZ time synchronization with SLM320 modules</li>
<li>Fixed connection to operator issue</li>
<li>Improved system stability and fixed general bugs</li>
</ul>
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;">'''03.27.12.Rev.00'''<br /> (recommended for FMM230, FMB230, FMB225, FMB240)</td>
<td style="vertical-align: middle; border-bottom: 2px solid #E8E8E8;"> 2022.02.17</td>
<td style="text-align: left; vertical-align: top; border-bottom: 2px solid #E8E8E8;">
<ul>
<li>Added FMM230, FMC230, FMC225, FMB230, FMB225, FMB240 support</li>
<li>Fixed manual frequency bands configuration for FMMx30 devices</li>
<li>Improved system stability and fixed general bugs</li>
</ul>
</td>
</tr>
</table>
}}
}}


[[Category:{{{model}}}]]
[[Category:{{{model}}}]]

Revision as of 14:52, 30 September 2025


[[Category:{{{model}}}]]

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMX_Professional_Trackers_Firmware_Changelog&oldid=107997"