Jump to content

Template:ATX System: Difference between revisions

ATX70Y upload works
Line 307: Line 307:


=== Power Bank mode and Power Off Sleep ===  
=== Power Bank mode and Power Off Sleep ===  
When the battery reaches the upper topoff threshold, charging stops and the power bank enters sleep mode, causing the external voltage to drop below 4V. The device then shuts down remaining modules and enters RTC sleep mode, indicated by the log: “USB disconnected, entering RTC sleep”.
When the battery reaches the upper topoff threshold, charging stops and the power bank enters sleep mode, causing the external voltage to drop below 4V. The device then shuts down remaining modules and enters Real Time Clock sleep mode.
If the device is in Power Off Sleep mode, but not yet in Real Time Clock sleep mode and the timer to generate a record expires, the device wakes up, creates the record, and then repeats the cycle.


If the device is in Power Off Sleep mode, but not yet in RTC sleep and the timer to generate a record expires, the device wakes up, creates the record, and then repeats the cycle. This is shown by the log: “Wakeup triggered. Current Mode: Power Off Sleep, Reason: RTC timer”.
'''Note:''' Power bank detection relies on sensing external power, not the USB detection interrupt, because some power banks leave a small voltage (1-3V) on the line when sleeping.
}}


Power bank detection relies on sensing external power, not the USB detection interrupt, because some power banks leave a small voltage (1-3V) on the line when sleeping.
}}
==Location settings==
==Location settings==
[[File:Location settings.png|right|500 px]]
[[File:Location settings.png|right|500 px]]