Jump to content
  • EN

Template:FTX SMS/GPRS Commands: Difference between revisions

From Teltonika Telematics Wiki
← Older editNewer edit →
VisualWikitext
No edit summary
NEW, IMPROVED TEMPLATE [GPKTMA-1792]
Line 1: Line 1:
All commands are case sensitive. When user tries to send SMS/GPRS message to device that operates in Deep Sleep mode, it cannot arrive to it because the GSM/GPRS module is disabled most of the time. Device will receive the SMS message when it exits Deep Sleep mode, but GPRS commands will not be received after exiting Deep Sleep Mode.<br />If the device is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.
This page lists SMS/GPRS commands for the {{{model}}} device.


SMS command structure:  
General information:
  <SMS password><space><command><space><value>
* A single SMS/GPRS command is limited to 160 characters.
SMS command [[FMB getinfo|getinfo]] example:
* GPRS commands require the [[Codec#Codec_12|Codec 12 protocol]].
* SMS/GPRS command functioning in Deep Sleep - because the GSM/GPRS module is disabled in Deep Sleep, the device will receive your SMS message only when it exists Deep Sleep (and GPRS commands will not be received at all).
==Command Syntax==
[[File:smsgprscommand_EXAMPLE.png|300px|right|alt=SMS/GPRS command example]]
'''Before all SMS/GPRS commands, enter the password OR a whitespace (when password is not set).'''<br>
All commands are case-sensitive.<br>
Always check the syntax of your desired command in its dedicated page.<br>
General command structure:
  <password><space><command><space><argument1><space><argument2>...
Examples:
* ''getinfo'' command, password "1234": <code>1234 getinfo</code>
* ''getinfo'' command, password not set: <code>&nbsp;getinfo</code> (note the whitespace before command)
* ''readavl'' command, password "1234", single argument: <code>1234 readavl 69</code>
* ''getparam'' command, password not set, multiple arguments: <code>&nbsp;getparam 2001;2002</code> (note the whitespace before command)
* ''setparam'' command, password "1234", multiple arguments with values: <code>1234 setparam 2001:wap;2002:user;2003:pass</code>
'''''Note!''' In some Apple iOS devices, any whitespace in the beginning of a message is automatically removed under certain conditions. This may affect SMS parsing in the receiving device.''


*If you have set SMS password: <code>password getinfo</code>
==Command List==
*If SMS password is not set leave one space before command: <code>&nbsp;getinfo</code>
===Default Commands===
 
These are the default SMS/GPRS commands, applicable for most Teltonika devices.
<br />
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
GPRS commands require [[Codec#Codec 12|Codec 12]] protocol.
<tr>
 
<th style="width:20%; vertical-align: middle; text-align: left;">COMMAND</th>
__TOC__
<th style="width:45%; vertical-align: middle; text-align: left;">DESCRIPTION</th>
 
<th style="width:35%; vertical-align: middle; text-align: left;">SYNTAX EXAMPLE</th>
===Common commands===
</tr>
----
<tr>
<table class="nd-othertables_2">
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - allver|allver]]</td>
<tr>
<td style="vertical-align: middle; text-align: left;">Returns information about device firmware and hardware.
        <th style="width:10%; text-align: center;">Command</th>
</td>
        <th style="width:25%; text-align: center;">Description</th>
<td style="vertical-align: middle; text-align: left;"><code>allver</code></td>
        <th style="width:10%; text-align: center;">Response</th>
</tr>
        <th style="width:15%; text-align: center;">Parameter Group</th>
<tr>
    </tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - battery|battery]]</td>
<tr>
<td style="vertical-align: middle; text-align: left;">Returns information about battery status. If battery is not present voltage and current will return zero value.</td>
        <td style="text-align: center;">''[[FMB getinfo|getinfo]]''</td>
<td style="vertical-align: middle; text-align: left;"><code>battery</code></td>
        <td style="text-align: left;">Device runtime system information.</td>
</tr>
        <td style="text-align: center;">Yes</td>
<tr>
        <td style="text-align: center;">Common commands</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - cpureset|cpureset]]</td>
    </tr>
<td style="vertical-align: middle; text-align: left;">Restarts device.</td>
<tr>
<td style="vertical-align: middle; text-align: left;"><code>cpureset</code></td>
        <td style="text-align: center;">''[[FMB getver|getver]]''</td>
</tr>
        <td style="text-align: left;">Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address.</td>
<tr>
        <td style="text-align: center;">Yes</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - deleterecords|deleterecords]]</td>
        <td style="text-align: center;">Common commands</td>
<td style="vertical-align: middle; text-align: left;">Deletes all records inside device.</td>
    </tr>
<td style="vertical-align: middle; text-align: left;"><code>deleterecords</code></td>
<tr>
</tr>
        <td style="text-align: center;">''[[FMB getstatus|getstatus]]''</td>
<tr>
        <td style="text-align: left;">Modem Status information.</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - delkey|delkey]]</td>
        <td style="text-align: center;">Yes</td>
<td style="vertical-align: middle; text-align: left;">Deletes current primary key.</td>
        <td style="text-align: center;">Common commands</td>
<td style="vertical-align: middle; text-align: left;"><code>delkey <old_keyword></code></td>
    </tr>
</tr>
<tr>
<tr>
        <td style="text-align: center;">''[[FMB getgps|getgps]]''</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - delsecondkey|delsecondkey]]</td>
        <td style="text-align: left;">Current GPS data, date and time.</td>
<td style="vertical-align: middle; text-align: left;">Deletes current recovery key.</td>
        <td style="text-align: center;">Yes</td>
<td style="vertical-align: middle; text-align: left;"><code>delsecondkey <old_keyword></code></td>
        <td style="text-align: center;">Common commands</td>
</tr>
    </tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - fwstats|fwstats]]</td>
        <td style="text-align: center;">[[FMB getio|getio]]''</td>
<td style="vertical-align: middle; text-align: left;">Information regarding firmware update statistics.</td>
        <td style="text-align: left;">Readout analog input,digital input and output.</td>
<td style="vertical-align: middle; text-align: left;"><code>fwstats</code></td>
        <td style="text-align: center;">Yes</td>
</tr>
        <td style="text-align: center;">Common commands</td>
<tr>
    </tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getgps|getgps]]</td>
<tr>
<td style="vertical-align: middle; text-align: left;">Returns information string regarding GNSS.</td>
        <td style="text-align: center;">''[[FMB ggps|ggps]]''</td>
<td style="vertical-align: middle; text-align: left;"><code>getgps</code></td>
        <td style="text-align: left;">Returns location information with Google maps link.</td>
</tr>
        <td style="text-align: center;">Yes</td>
<tr>
        <td style="text-align: center;">Common commands</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getimeiccid|getimeiccid]]</td>
    </tr>
<td style="vertical-align: middle; text-align: left;">Returns information about modem IMEI and SIM CCID.</td>
<tr>
<td style="vertical-align: middle; text-align: left;"><code>getimeiccid</code></td>
        <td style="text-align: center;">''readavl #''</td>
</tr>
        <td style="text-align: left;">Returns AVL status, # AVL ID.</td>
<tr>
        <td style="text-align: center;">Yes</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getimsi|getimsi]]</td>
        <td style="text-align: center;">Common commands</td>
<td style="vertical-align: middle; text-align: left;">Returns IMSI code of currently used SIM card.</td>
    </tr>
<td style="vertical-align: middle; text-align: left;"><code>getimsi</code></td>
<tr>
</tr>
        <td style="text-align: center;">''[[FMB cpureset|cpureset]]''</td>
<tr>
        <td style="text-align: left;">Resets device</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getinfo|getinfo]]</td>
        <td style="text-align: center;">No</td>
<td style="vertical-align: middle; text-align: left;">Returns information string.</td>
        <td style="text-align: center;">Common commands</td>
<td style="vertical-align: middle; text-align: left;"><code>getinfo</code></td>
    </tr>
</tr>
<tr>
<tr>
        <td style="text-align: center;">''[[FMB fwstats|fwstats]]''</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getops|getops]]</td>
        <td style="text-align: left;">Get data about FW and restarts</td>
<td style="vertical-align: middle; text-align: left;">Returns list of currently visible operators.</td>
        <td style="text-align: center;">Yes</td>
<td style="vertical-align: middle; text-align: left;"><code>getops</code></td>
        <td style="text-align: center;">Common commands</td>
</tr>
    </tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getparam|getparam]]</td>
        <td style="text-align: center;">''getrecord''</td>
<td style="vertical-align: middle; text-align: left;">Get configured parameter value.</td>
        <td style="text-align: left;">SMS command initiates saving and sending of high priority record.</td>
<td style="vertical-align: middle; text-align: left;"><code>getparam <param_id1>;<param_id2>;...</code></td>
        <td style="text-align: center;">No</td>
</tr>
        <td style="text-align: center;">Common commands</td>
<tr>
    </tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getrecord|getrecord]]</td>
<tr>
<td style="vertical-align: middle; text-align: left;">Generates a high priority record so force device to send all records to the server.</td>
        <td style="text-align: center;">''[[FMB getimeiccid|getimeiccid #]]''</td>
<td style="vertical-align: middle; text-align: left;"><code>getrecord</code></td>
        <td style="text-align: left;">Response is sent to SMS/GPRS command sender and also to GSM number provided.
</tr>
# - GSM number using international format e.g. 37069012345</td>
<tr>
        <td style="text-align: center;">Yes</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getstatus|getstatus]]</td>
        <td style="text-align: center;">Common commands</td>
<td style="vertical-align: middle; text-align: left;">Get status about device.</td>
    </tr>
<td style="vertical-align: middle; text-align: left;"><code>getstatus</code></td>
<tr>
</tr>
        <td style="text-align: center;">''[[FMB getimsi|getimsi]]''</td>
<tr>
        <td style="text-align: left;">Sends the IMSI number of the SIM card inserted as a response to the sender.<br>If two SIM cards are inserted in the device, the response will be the IMSI number of the currently active SIM card.</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getver|getver]]</td>
<br />
<td style="vertical-align: middle; text-align: left;">Returns code version, device IMEI, modem app version, RTC time, Init time, etc.</td>
        <td style="text-align: center;">Yes</td>
<td style="vertical-align: middle; text-align: left;"><code>getver</code></td>
        <td style="text-align: center;">Common commands</td>
</tr>
    </tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getvin|getvin]]</td>
        <td style="text-align: center;">''[[FMB allver|allver]]''</td>
<td style="vertical-align: middle; text-align: left;">Returns VIN code that is currently used.</td>
        <td style="text-align: left;">Responds with information about hardware and firmware versions and storage space</td>
<td style="vertical-align: middle; text-align: left;"><code>getvin</code></td>
        <td style="text-align: center;">Yes</td>
</tr>
        <td style="text-align: center;">Common commands</td>
<tr>
    </tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - ggps|ggps]]</td>
<tr>
<td style="vertical-align: middle; text-align: left;">Returns information about current date, time, speed, device coordinates and a link to Google Maps with current position.</td>
        <td style="text-align: center;">''[[FMB getparam|getparam]] #''</td>
<td style="vertical-align: middle; text-align: left;"><code>ggps</code></td>
        <td rowspan="2" style="text-align: left;">Returns selected parameter value.
</tr>
# - first [[FMB Device Family Parameter list|ID value]].
<tr>
# - second [[FMB Device Family Parameter list|ID value]].
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - readavl|readavl]]</td>
# - third [[FMB Device Family Parameter list|ID value]].
<td style="vertical-align: middle; text-align: left;">Returns information string regarding AVL ID value.</td>
SMS command is limited to 160 characters.</td>
<td style="vertical-align: middle; text-align: left;"><code>readavl <AVL_ID></code></td>
        <td rowspan="2" style="text-align: center;">Yes</td>
</tr>
        <td rowspan="2" style="text-align: center;">Common commands</td>
<tr>
    </tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - setkey|setkey]]</td>
<tr>
<td style="vertical-align: middle; text-align: left;">Set new or change current primary key.</td>
        <td style="text-align: center;">''[[FMB getparam|getparam]]'' #;#;…</td>
<td style="vertical-align: middle; text-align: left;"><code>setkey <old_keyword> <new_keyword></code></td>
    </tr>
</tr>
<tr>
<tr>
        <td style="text-align: center;">''[[FMB setparam|setparam]]'' #:#</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - setparam|setparam]]</td>
        <td rowspan="2" style="text-align: left;">Sets selected parameter value <br /><br />
<td style="vertical-align: middle; text-align: left;">Change configurable parameter value.</td>
''[Parameter ID]'' ''':''' ''[New Parameter Value]'' ''';''' ''[Parameter ID]'' ''':''' ''[New Parameter Value]''...<br /><br />
<td style="vertical-align: middle; text-align: left;"><code>setparam <param_id1>:<value>;<param_id2>:<value>;...</code></td>
SMS command is limited to 160 characters.</td>
</tr>
        <td rowspan="2" style="text-align: center;">Yes</td>
<tr>
        <td rowspan="2" style="text-align: center;">Common commands</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - setsecondkey|setsecondkey]]</td>
    </tr>
<td style="vertical-align: middle; text-align: left;">Set new or change current recovery key.</td>
<tr>
<td style="vertical-align: middle; text-align: left;"><code>setsecondkey <old_keyword> <new_keyword></code></td>
        <td style="text-align: center;">''[[FMB setparam|setparam]]'' #:#;#:#;…</td>
</tr>
    </tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - towingreact|towingreact]]</td>
        <td style="text-align: center;">''[[FMB flush|flush]]'' #,#,#,#,#,#,#</td>
<td style="vertical-align: middle; text-align: left;">Reactivates towing Detection scenario. Intended for use in case of a fake towing detection event.</td>
        <td style="text-align: left;">Redirects device to other server.<br />
<td style="vertical-align: middle; text-align: left;"><code>towingreact</code></td>
1.# - IMEI.<br />
</tr>
2.# - APN.<br />
<tr>
3.# - LOGIN.<br />
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - wdlog|wdlog]]</td>
4.# - PASS.<br />
<td style="vertical-align: middle; text-align: left;">Returns information about the recent watchdog events.</td>
5.# - IP.<br />
<td style="vertical-align: middle; text-align: left;"><code>wdlog</code></td>
6.# - PORT.<br />
</tr>
7.# - MODE (0-TCP/1-UDP).</td>
<tr>
        <td style="text-align: center;">Yes</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - web_connect|web_connect]]</td>
        <td style="text-align: center;">Common commands</td>
<td style="vertical-align: middle; text-align: left;">Triggers FOTA service/connection.</td>
    </tr>
<td style="vertical-align: middle; text-align: left;"><code>web_connect</code></td>
<tr>
</tr>
        <td style="text-align: center;">''web_connect''</td>
        <td style="text-align: left;">Forces device to connect to Fota WEB immediately.</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
<tr>
        <td style="text-align: center;">''deleterecords''</td>
        <td style="text-align: left;">Delete all records from SD card.</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
   
<!-- If model supports DOUT1, then show -->
{{#if: {{FTX Pin Support List|model={{{model}}}|pin=DOUT1}} |
    <tr>
        <td style="text-align: center;">[[FMB setdigout|setdigout]] ## Y1 Y2 Z1 Z2''</td>
        <td style="text-align: left;">Set digital output.<br/>
1.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT1.<br/>
2.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT2.<br/>
Y1 – timeout value for DOUT1 if needed (in seconds).<br/>
Y2 – timeout value for DOUT2 if needed (in seconds).<br/>
Z1 – maximum speed value for DOUT1 if needed.<br/>
Z2 – maximum speed value for DOUT2 if needed.</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
<tr>
        <td style="text-align: center;">[[FMB setigndigout|setigndigout]] ### Y1 Y2 Y3''</td>
        <td style="text-align: left;">Set digital output when ignition is off.<br/>
1.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT1.<br/>
2.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT2.<br/>
3.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT3.<br/>
Y1 – timeout value for DOUT1 if needed (in seconds).<br/>
Y2 – timeout value for DOUT2 if needed (in seconds).<br/>
Y3 – timeout value for DOUT3 if needed (in seconds).<br/>
</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
}}
 
<tr>
        <td style="text-align: center;">''[[FMB battery|battery]]''</td>
        <td style="text-align: left;">Returns battery state info.</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
<tr>
        <td style="text-align: center;">''wdlog''</td>
        <td style="text-align: left;">Returns all information about 'watch dogs'</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
<tr>
        <td style="text-align: center;">''defaultcfg''</td>
        <td style="text-align: left;">Load default configuration.</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
<tr>
        <td style="text-align: center;">''[[FMB setkey|setkey]] # #''</td>
        <td style="text-align: left;">Add new or change current configuration keyword. If device is locked, keyword cannot be changed.<br />
1.# - old keyword (if adding new keyword space).<br />
2.# - new keyword. </td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
<tr>
        <td style="text-align: center;">''[[FMB delkey|delkey]] #''</td>
        <td style="text-align: left;">Remove existing keyword (If device is locked, keyword cannot be changed).<br />
# - old keyword.</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
<tr>
        <td style="text-align: center;">''[[FMB bbread|bbread]] #''</td>
        <td style="text-align: left;">Return black box information (HEX value of event ID and HEX value of custom data field (optional)).<br />
# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
<tr>
        <td style="text-align: center;">''[[FMB bbinfo|bbinfo]] #''</td>
        <td style="text-align: left;">Return same information as bbread command but additional all events timestamp is written in HEX.<br />
# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
<tr>
        <td style="text-align: center;">''extformat''</td>
        <td style="text-align: left;">Format SD card (external memory).</td>
        <td style="text-align: center;">Yes</td>
        <td style="text-align: center;">Common commands</td>
    </tr>
</table>
</table>


<!-- If model supports Manual CAN, then show -->  
===Other Commands===
{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual CAN}} |
These SMS/GPRS commands depend on device hardware or firmware.
===CAN commands===
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
----
<tr>
<table class="nd-othertables_2">
<th style="width:20%; vertical-align: middle; text-align: left;">COMMAND</th>
<tr>
<th style="width:45%; vertical-align: middle; text-align: left;">DESCRIPTION</th>
        <th style="width:10%; text-align: center;">Command</th>
<th style="width:35%; vertical-align: middle; text-align: left;">SYNTAX EXAMPLE</th>
        <th style="width:25%; text-align: center;">Description</th>
</tr>
        <th style="width:10%; text-align: center;">Response</th>
<tr>
        <th style="width:15%; text-align: center;">Parameter Group</th>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - dr_reset|dr_reset]]</td>
    </tr>
<td style="vertical-align: middle; text-align: left;">Erase all Dead Reckoning calibration parameters. After executing the command, the device requires full calibration again.</td>
<tr>
<td style="vertical-align: middle; text-align: left;"><code>dr_reset</code></td>
        <td style="text-align: center;">''mcan_cmd:<Command No.>''</td>
</tr>
        <td style="text-align: left;">Used to trigger Manual CAN Command.</td>
<tr>
        <td style="text-align: center;">Yes</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - extformat|extformat]]</td>
        <td style="text-align: center;">Manual CAN Commands</td>
<td style="vertical-align: middle; text-align: left;">Quick formats external storage.</td>
    </tr>
<td style="vertical-align: middle; text-align: left;"><code>extformat</code></td>
<tr>
</tr>
        <td style="text-align: center;">''mcan_stop:<Command No.>''</td>
<tr>
        <td style="text-align: left;"> Used to turn OFF periodic Manual CAN Command.</td>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - fall_down_reset|fall_down_reset]]</td>
        <td style="text-align: center;">Yes</td>
<td style="vertical-align: middle; text-align: left;">Triggers fall down reset.</td>
        <td style="text-align: center;">Manual CAN Commands</td>
<td style="vertical-align: middle; text-align: left;"><code>fall_down_reset</code></td>
    </tr>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getcontsens|getcontsens]]</td>
<td style="vertical-align: middle; text-align: left;">Returns IDs of active and saved temperature sensors.</td>
<td style="vertical-align: middle; text-align: left;"><code>getcontsens</code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getio|getio]]</td>
<td style="vertical-align: middle; text-align: left;">Returns information string with values of all available IO pin values.</td>
<td style="vertical-align: middle; text-align: left;"><code>getio</code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - oemreset|oemreset]]</td>
<td style="vertical-align: middle; text-align: left;">Clears OEM file from device memory and resets OEM logic. Immediately requests a new OEM file if all conditions are met - VIN is available.</td>
<td style="vertical-align: middle; text-align: left;"><code>oemreset</code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - on_demand_tracking|on_demand_tracking]]</td>
<td style="vertical-align: middle; text-align: left;">Toggles on-demand tracking.</td>
<td style="vertical-align: middle; text-align: left;"><code>on_demand_tracking <arg></code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - savecontsens|savecontsens]]</td>
<td style="vertical-align: middle; text-align: left;">Save active sensors IDs or IDs passed as argument.</td>
<td style="vertical-align: middle; text-align: left;"><code>savecontsens <id1>,<id2>,<id4>,<id4>,<id5></code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;"></td>
<td style="vertical-align: middle; text-align: left;"></td>
<td style="vertical-align: middle; text-align: left;"></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - secooff|secooff]]</td>
<td style="vertical-align: middle; text-align: left;">Stops Seco scenario.</td>
<td style="vertical-align: middle; text-align: left;"><code>secooff</code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - secoon|secoon]]</td>
<td style="vertical-align: middle; text-align: left;">Starts Seco scenario.</td>
<td style="vertical-align: middle; text-align: left;"><code>secoon</code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - setdigout|setdigout]]</td>
<td style="vertical-align: middle; text-align: left;">Controls specified digital output. Sets/clears DOUTs with optional timeouts and speed thresholds. Accepts as many parameter sets, as your device has DOUTs.</td>
<td style="vertical-align: middle; text-align: left;"><code>setdigout ### <Y1> <Y2> <Y3> <Z1> <Z2> <Z3></code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - setigndigout|setigndigout]]</td>
<td style="vertical-align: middle; text-align: left;">Controls the specified digital output when the ignition is off. DOUTs are controlled dynamically.</td>
<td style="vertical-align: middle; text-align: left;"><code>setigndigout ### <Y1> <Y2> <Y3></code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;"></td>
<td style="vertical-align: middle; text-align: left;"></td>
<td style="vertical-align: middle; text-align: left;"></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - mcan_cmd|mcan_cmd]]</td>
<td style="vertical-align: middle; text-align: left;">Activates sending specified Manual CAN command.</td>
<td style="vertical-align: middle; text-align: left;"><code>mcan_cmd: <command_ID></code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - mcan_stop|mcan_stop]]</td>
<td style="vertical-align: middle; text-align: left;">Stops sending specified Manual CAN command.</td>
<td style="vertical-align: middle; text-align: left;"><code>mcan_stop: <command_ID></code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;"></td>
<td style="vertical-align: middle; text-align: left;"></td>
<td style="vertical-align: middle; text-align: left;"></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - cleardtc|cleardtc]]</td>
<td style="vertical-align: middle; text-align: left;">Clears OBD DTCs.</td>
<td style="vertical-align: middle; text-align: left;"><code>cleardtc <module_id></code></td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - scandtc|scandtc]]</td>
<td style="vertical-align: middle; text-align: left;">Sends selected module fault codes back to user.</td>
<td style="vertical-align: middle; text-align: left;"><code>scandtc <module_id></code></td>
</tr>
</table>
</table>
}}


[[Category:{{{model}}}]]
[[Category:{{{model}}}]]

Revision as of 07:46, 26 January 2026

This page lists SMS/GPRS commands for the {{{model}}} device.

General information:

  • A single SMS/GPRS command is limited to 160 characters.
  • GPRS commands require the Codec 12 protocol.
  • SMS/GPRS command functioning in Deep Sleep - because the GSM/GPRS module is disabled in Deep Sleep, the device will receive your SMS message only when it exists Deep Sleep (and GPRS commands will not be received at all).

Command Syntax

SMS/GPRS command example

Before all SMS/GPRS commands, enter the password OR a whitespace (when password is not set).
All commands are case-sensitive.
Always check the syntax of your desired command in its dedicated page.
General command structure: 

<password><space><command><space><argument1><space><argument2>...

Examples:

  • getinfo command, password "1234": 1234 getinfo
  • getinfo command, password not set:  getinfo (note the whitespace before command)
  • readavl command, password "1234", single argument: 1234 readavl 69
  • getparam command, password not set, multiple arguments:  getparam 2001;2002 (note the whitespace before command)
  • setparam command, password "1234", multiple arguments with values: 1234 setparam 2001:wap;2002:user;2003:pass

Note! In some Apple iOS devices, any whitespace in the beginning of a message is automatically removed under certain conditions. This may affect SMS parsing in the receiving device.

Command List

Default Commands

These are the default SMS/GPRS commands, applicable for most Teltonika devices.

COMMAND DESCRIPTION SYNTAX EXAMPLE
allver Returns information about device firmware and hardware. allver
battery Returns information about battery status. If battery is not present voltage and current will return zero value. battery
cpureset Restarts device. cpureset
deleterecords Deletes all records inside device. deleterecords
delkey Deletes current primary key. delkey <old_keyword>
delsecondkey Deletes current recovery key. delsecondkey <old_keyword>
fwstats Information regarding firmware update statistics. fwstats
getgps Returns information string regarding GNSS. getgps
getimeiccid Returns information about modem IMEI and SIM CCID. getimeiccid
getimsi Returns IMSI code of currently used SIM card. getimsi
getinfo Returns information string. getinfo
getops Returns list of currently visible operators. getops
getparam Get configured parameter value. getparam <param_id1>;<param_id2>;...
getrecord Generates a high priority record so force device to send all records to the server. getrecord
getstatus Get status about device. getstatus
getver Returns code version, device IMEI, modem app version, RTC time, Init time, etc. getver
getvin Returns VIN code that is currently used. getvin
ggps Returns information about current date, time, speed, device coordinates and a link to Google Maps with current position. ggps
readavl Returns information string regarding AVL ID value. readavl <AVL_ID>
setkey Set new or change current primary key. setkey <old_keyword> <new_keyword>
setparam Change configurable parameter value. setparam <param_id1>:<value>;<param_id2>:<value>;...
setsecondkey Set new or change current recovery key. setsecondkey <old_keyword> <new_keyword>
towingreact Reactivates towing Detection scenario. Intended for use in case of a fake towing detection event. towingreact
wdlog Returns information about the recent watchdog events. wdlog
web_connect Triggers FOTA service/connection. web_connect

Other Commands

These SMS/GPRS commands depend on device hardware or firmware.

COMMAND DESCRIPTION SYNTAX EXAMPLE
dr_reset Erase all Dead Reckoning calibration parameters. After executing the command, the device requires full calibration again. dr_reset
extformat Quick formats external storage. extformat
fall_down_reset Triggers fall down reset. fall_down_reset
getcontsens Returns IDs of active and saved temperature sensors. getcontsens
getio Returns information string with values of all available IO pin values. getio
oemreset Clears OEM file from device memory and resets OEM logic. Immediately requests a new OEM file if all conditions are met - VIN is available. oemreset
on_demand_tracking Toggles on-demand tracking. on_demand_tracking <arg>
savecontsens Save active sensors IDs or IDs passed as argument. savecontsens <id1>,<id2>,<id4>,<id4>,<id5>
secooff Stops Seco scenario. secooff
secoon Starts Seco scenario. secoon
setdigout Controls specified digital output. Sets/clears DOUTs with optional timeouts and speed thresholds. Accepts as many parameter sets, as your device has DOUTs. setdigout ### <Y1> <Y2> <Y3> <Z1> <Z2> <Z3>
setigndigout Controls the specified digital output when the ignition is off. DOUTs are controlled dynamically. setigndigout ### <Y1> <Y2> <Y3>
mcan_cmd Activates sending specified Manual CAN command. mcan_cmd: <command_ID>
mcan_stop Stops sending specified Manual CAN command. mcan_stop: <command_ID>
cleardtc Clears OBD DTCs. cleardtc <module_id>
scandtc Sends selected module fault codes back to user. scandtc <module_id>

[[Category:{{{model}}}]]

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FTX_SMS/GPRS_Commands&oldid=110784"