Difference between revisions of "FMB001 Speed Elements"
From Wiki Knowledge Base | Teltonika GPS
(Created page with "* In the GPS element, there is a 2-byte speed. - this is speed based on GPS data, it is always included in the packet. x150px|none * If I/O elemen...") |
|||
| Line 3: | Line 3: | ||
* If I/O element "Speed" is enabled. In AVL data packets IO element with ID 24 is going to be included. It is a 2-byte I/O element - it is the same speed from GPS, just that it is included as IO element to have the possibility to create events for it. | * If I/O element "Speed" is enabled. In AVL data packets IO element with ID 24 is going to be included. It is a 2-byte I/O element - it is the same speed from GPS, just that it is included as IO element to have the possibility to create events for it. | ||
[[Image:Wiki_io_speed.png|x150px|none]] | [[Image:Wiki_io_speed.png|x150px|none]] | ||
| − | * There is a I/O element with ID 37. This is a 1 byte | + | * There is a I/O element with ID 37. This is a 1 byte element - it is speed from OBDII data. It is wise to use this element as the base for correct speed readings, as GPS data sometimes might be not very accurate. |
[[Image:Wiki_obdspeed.png|x150px|none]] | [[Image:Wiki_obdspeed.png|x150px|none]] | ||
Revision as of 13:45, 24 September 2018
Main Page > OBD Trackers > FMB001 > FMB001 Manual > FMB001 Speed Elements- In the GPS element, there is a 2-byte speed. - this is speed based on GPS data, it is always included in the packet.
- If I/O element "Speed" is enabled. In AVL data packets IO element with ID 24 is going to be included. It is a 2-byte I/O element - it is the same speed from GPS, just that it is included as IO element to have the possibility to create events for it.
- There is a I/O element with ID 37. This is a 1 byte element - it is speed from OBDII data. It is wise to use this element as the base for correct speed readings, as GPS data sometimes might be not very accurate.
