Codec

Introduction

A codec is a device or computer program for encoding or decoding a digital data stream or signal. Codec is a portmanteau of coder-decoder. A codec encodes a data stream or a signal for transmission and storage, possibly in encrypted form, and the decoder function reverses the encoding for playback or editing.

Codec ID table

Codec 8	Codec 8 extended	Codec 12	Codec 13	Codec 16
0x08	0x8E	0x0C	0x0D	0x10

Codec 8

• AVL data packet

Because the smallest information amount that can be written is one bit, there can be some bits left unused when result is byte array. Any unused bits should be left blank.

Below table represents AVL data packet structure.

4 zeros	Data field length	Codec ID	Number of Data 1	AVL Data	Number of Data 2	CRC-16
4 bytes	4 bytes	1 byte	1 byte	30-147 bytes	1 byte	4 bytes

Number of data – number of encoded data (number of records). Codec ID is constant 08.

Data field length is the length of bytes [codec id, number of data 2]. Number of data 1 should always be equal to number of data 2 byte. CRC-16 is 4 bytes, but first two are zeroes and last two are CRC-16 calculated for [codec id, number of data 2] Minimum AVL packet size is 45 bytes (all IO elements disabled). Maximum AVL packet size for one record is 783 bytes.

• AVL data

Timestamp	Priority	GPS Element	IO element
8 bytes	1 byte	15 bytes	6-123

Timestamp – difference, in milliseconds, between the current time and midnight, January 1, 1970 UTC

• Priority

0	Low
1	High
2	Panic

• GPS Element

Longtitude	Latitude	Alitude	Angle	Stellites	Speed
4 bytes	4 bytes	2 bytes	2 bytes	1 bytes	2 bytes

X Longitude

Y Latitude1

Altitude In meters above sea level1

Angle In degrees, 0 is north, increasing clock-wise 1

Satellites Number of visible satellites1

Speed Speed in km/h. 0x0000 if GPS data is invalid1

Longitude and latitude are integer values built from degrees, minutes, seconds and milliseconds by formula

d - Degrees

m - Minutes

s - Seconds

ms - Milliseconds

p - Precision (10000000)

If longitude is in west or latitude in south, multiply result by –1. To determine if the coordinate is negative, convert it to binary format and check the very first bit. If it is 0, coordinate is positive, if it is 1, coordinate is negative.

Example:

Received value: 20 9c ca 80 Converted to BIN: 00100000 10011100 11001010 10000000 first bit is 0, which means coordinate is positive Convered to DEC: 547146368 For more information see two‘s compliment arithmetics.

• IO Element

Event IO ID	1 byte
N of Total IO	1 byte
N1 of One Byte IO	1 byte
1’st IO ID	1 byte
1’st IO Value	1 byte
...
N1’th IO ID	1 byte
N1’th IO Value	1 byte
N2 of Two Bytes	1 byte
1’st IO ID	1 byte
1’st IO Value	2 bytes
...
N2’th IO ID	1 byte
N2’th IO Value	2 bytes
N4 of Four Bytes	1 byte
1’st IO ID	1 byte
1’st IO Value	4 byte
...
N4’th IO ID	1 byte
N4’th IO Value	4 bytes
N8 of Eight Bytes	1 byte
1’st IO ID	1 byte
1’st IO Value	8 bytes
...
N8’th IO ID	1 byte
N8’th IO Value	8 bytes

Event IO ID – if data is acquired on event – this field defines which IO property has changed and generated an event. If data cause is not event – the value is 0.

N total number of properties coming with record (N=N1+N2+N4+N8)

N1 number of properties, which length is 1 byte

N2 number of properties, which length is 2 bytes

N4 number of properties, which length is 4 bytes

N8 number of properties, which length is 8 bytes

Example

Received data:

000000000000008c00010000013feb55ff74000f0ea850209a69000094000012000000

1e09010002000300040016014703f0001504c8000c0900730a00460b00501300464306

d7440000b5000bb60007422e9f180000cd0386ce000107c700000000f10000601a4600

0001344800000bb84900000bb84a00000bb84c00000000024e0000000000000000cf00

000000000000000100003fca

In total 152 Bytes.