Template:FMT1 First start card: Difference between revisions
No edit summary |
|||
| Line 50: | Line 50: | ||
# Unscrew '''6 screws''' counterclockwise. | # Unscrew '''6 screws''' counterclockwise. | ||
# Remove the '''cover'''. | # Remove the '''cover'''. | ||
# Insert '''Micro-SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMT100 Security info|Security info]]}}} how to enter it later with [[Teltonika Configurator]]. Make sure that Micro-SIM card '''cut-off corner''' is pointing forward to slot. | # Insert '''Micro-SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMT100 Security info|'''Security info''']]}}} how to enter it later with '''[[Teltonika Configurator]]'''. Make sure that Micro-SIM card '''cut-off corner''' is pointing forward to slot. | ||
# Connect the '''battery''' as shown to device. Position the battery in place where it does not obstruct other components. | # Connect the '''battery''' as shown to device. Position the battery in place where it does not obstruct other components. | ||
# After '''configuration''', see [[FMT100_First_Start#PC Connection (Windows)|PC Connection (Windows)]], attach device '''cover''' back and '''screw''' in all screws. | # After '''configuration''', see [[FMT100_First_Start#PC Connection (Windows)|PC Connection (Windows)]], attach device '''cover''' back and '''screw''' in all screws. | ||
Revision as of 11:02, 20 December 2018
Special and small waterproof GNSS tracker with built-in accelerometer and gyroscope
Know your device
Pinout
| PIN NUMBER | PIN NAME |
DESCRIPTION |
|---|---|---|
| 1 | VCC (10-30)V DC (+) | (Red) Power supply (+10-30 V DC) |
| 2 | GND (-) | (Black) Ground |
Set up your device
How to insert Micro-SIM card and connect the battery
- Unscrew 6 screws counterclockwise.
- Remove the cover.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later with Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect the battery as shown to device. Position the battery in place where it does not obstruct other components.
- After configuration, see PC Connection (Windows), attach device cover back and screw in all screws.
- Device is ready to be mounted.
 | Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |