Template:MTB100 First start card: Difference between revisions

← Older edit Newer edit →

VisualWikitext

Revision as of 16:25, 10 April 2019

Small and smart tracker with Blue-tooth

File:Mtb100 main.png

How to insert Micro-SIM card

Gently remove MTB100 cover using plastic pry tool from both sides.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
Attach device cover back.
Device is ready to be connected.

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

@@ Line 23: / Line 23: @@
 | [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
 |}
-=='''How to insert microSD card'''==
-# Push microSD card lock case.
-# Open microSD card locker.
-# Correctly insert microSD card into slot.
-# Close microSD card locker.
-# Push microSD card lock case to locked position.
-<b>NOTE:</b> SD cards are only used in devices manufactured until '''2018-04'''. Newer devices have internal flash memory.
-[[Image:Sd_card_1.png|x150px]] [[Image:Sd_card_2.png|x150px]] [[Image:Sd_card_3.png|x150px]] [[Image:Sd_card_4.png|x150px]] [[Image:Sd_card_5.png|x150px]]