Difference between revisions of "Template:MTB100 First start card"

From Wiki Knowledge Base | Teltonika GPS
Line 9: Line 9:
  
  
=='''How to insert Micro-SIM card'''==
+
=='''How to insert Micro-SIM card and connect internal back-up battery'''==
  
 
# Gently remove {{{model|MTB100}}} '''cover''' using '''plastic pry tool''' from both sides.
 
# Gently remove {{{model|MTB100}}} '''cover''' using '''plastic pry tool''' from both sides.
 
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB900 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
 
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB900 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
 +
# Connect '''internal back-up battery'''.
 
# Attach device '''cover''' back.
 
# Attach device '''cover''' back.
# Device is ready to be connected.
 
  
 
[[Image:MTB100_cover_1.png|280px]][[Image:MTB100_cover_2.png|280px]][[Image:MTB100_cover_3.png|280px]][[Image:MTB100_cover_4.png|280px]]
 
[[Image:MTB100_cover_1.png|280px]][[Image:MTB100_cover_2.png|280px]][[Image:MTB100_cover_3.png|280px]][[Image:MTB100_cover_4.png|280px]]

Revision as of 13:56, 18 April 2019

Qsg rut950 teltonika.PNG

Small and smart tracker with Blue-tooth




How to insert Micro-SIM card and connect internal back-up battery

  1. Gently remove MTB100 cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect internal back-up battery.
  4. Attach device cover back.

MTB100 cover 1.pngMTB100 cover 2.pngMTB100 cover 3.pngMTB100 cover 4.png


Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.