FMB120 LED status: Difference between revisions
Atabasnikov (talk | contribs) m Protected "FMB120 LED status" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)) |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Template:FMB1 LED status|model=FMB120}} | {{Template:FMB1 LED status|model=FMB120}} | ||
[[Category:FMB120 Manual]] | |||
Revision as of 15:20, 29 April 2019
Main Page > Advanced Trackers > FMB120 > FMB120 Manual > FMB120 LED statusThis section is an explanation of LED indications on an FMB120 device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |
CAN Status LED indications
| Behaviour | Meaning |
|---|---|
| Blinking fast constantly | Reading CAN data from vehicle |
| Permanently switched on | CAN unit unresponsive |
| Off | Wrong program number or wrong wire connection or CAN processor is in sleep mode = CAN data not received |