Template:FMB96X First start card: Difference between revisions

Revision as of 15:13, 8 May 2019

Special and smart tracker with wide power supply range and high capacity internal Ni-MH battery

How to insert Micro-SIM card

Gently remove FMB96X cover using plastic pry tool from both sides.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
Attach device cover back.
Device is ready to be connected.

File:FMB964 SIM Battery 1.jpegFile:FMB964 sim battery insert 2.jpgFile:FMB964 sim battery insert 3.jpgFile:FMB964 sim battery insert 4.jpg

Note: Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

How to insert microSD card

Push microSD card lock case.
Open microSD card locker.
Correctly insert microSD card into slot.
Close microSD card locker.
Push microSD card lock case to locked position.

Pinout


PIN NUMBER	PIN NAME	DESCRIPTION
1	VCC (6-30)V DC (+)	Power supply (6-30) V DC (+).
2	GND (-)	Ground.
3	DIN 1	Digital input, channel 1. DEDICATED FOR IGNITION INPUT
4	AIN 1	Analog input, channel 1. Input range: 0-30 V DC.
5	DOUT 1	Digital output. Open collector output. Max. 3,3 A DC.

Revision as of 15:18, 21 December 2018 view source Rimkus.ro (talk \| contribs) 0 edits No edit summary ← Older edit		Revision as of 15:13, 8 May 2019 view source Danielekrau (talk \| contribs) 0 edits No edit summary Newer edit →
Line 20:		Line 20:


	[[Image:~~964cover1~~.~~png~~\|280px]][[Image:~~964cover2~~.~~png~~\|280px]][[Image:~~964cover3~~.~~png~~\|280px]][[Image:~~964cover4~~.~~png~~\|280px]]		[[Image:FMB964_SIM_Battery_1.jpeg\|280px]][[Image:FMB964_sim_battery_insert_2.jpg\|280px]][[Image:FMB964_sim_battery_insert_3.jpg\|280px]][[Image:FMB964_sim_battery_insert_4.jpg\|280px]]