Difference between revisions of "FMB640 Custom scenario"
From Wiki Knowledge Base | Teltonika GPS
Line 8: | Line 8: | ||
* DOUT2 | * DOUT2 | ||
* DOUT3 | * DOUT3 | ||
+ | * [[FMB640_System_settings#AIN4.2FDOUT4_Mode | DOUT4 (Mode must be selected)]] | ||
The event will be generated according to the "I/O" element's logic, but the priority of "Custom scenario" event does not depend on the "I/O" element settings and can be selected in the scenario section. | The event will be generated according to the "I/O" element's logic, but the priority of "Custom scenario" event does not depend on the "I/O" element settings and can be selected in the scenario section. | ||
[[image:Custom_Scenario_2.PNG]] | [[image:Custom_Scenario_2.PNG]] |
Revision as of 08:05, 15 July 2019
Main Page > EOL Products > FMB640 > FMB640 Configuration > FMB640 Custom scenarioFMB640 devices has „Custom scenarios“ functionality, which is designed to create four different instances for DOUT control. Scenario has three different possible sources, which logic is taken from „I/O“ element section and if triggered will create an event or / and activate the selected DOUT.
Each of the four scenarios can be selected to control:
- DOUT1
- DOUT2
- DOUT3
- DOUT4 (Mode must be selected)
The event will be generated according to the "I/O" element's logic, but the priority of "Custom scenario" event does not depend on the "I/O" element settings and can be selected in the scenario section.