Template:FMU1 First start card: Difference between revisions

Revision as of 07:00, 13 August 2019

GNSS/GSM/Bluetooth tracker with internal GNSS/GSM antennas

Gently remove FMU1YX cover using plastic pry tool from both sides.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
Attach device cover back.
Device is ready to be connected.

@@ Line 16: / Line 16: @@
 [[Image:Fmb120_cover_1.png|280px]][[Image:Fmb120_cover_2.png|280px]][[Image:Fmb120_cover_3.png|280px]][[Image:Fmb120_cover_4.png|280px]]
-{|
-|-
-| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
-|}
-{{{microsd_insert|
-=='''How to insert microSD card'''==
-# Push microSD card lock case.
-# Open microSD card locker.
-# Correctly insert microSD card into slot.
-# Close microSD card locker.
-# Push microSD card lock case to locked position.
-[[Image:Sd_card_1.png|x150px]] [[Image:Sd_card_2.png|x150px]] [[Image:Sd_card_3.png|x150px]] [[Image:Sd_card_4.png|x150px]] [[Image:Sd_card_5.png|x150px]]
-}}}