Jump to content
  • EN

FMM640 SMS/GPRS command list: Difference between revisions

From Teltonika Telematics Wiki
Newer edit →
VisualWikitext
Created page with "All commands are case sensitive. When user tries to send SMS/GPRS message to FMB640 that operates in Deep Sleep mode, it cannot arrive to FMB640 device because the GSM/GPRS mo..."
 
No edit summary
Line 1: Line 1:
All commands are case sensitive. When user tries to send SMS/GPRS message to FMB640 that operates in Deep Sleep mode, it cannot arrive to FMB640 device because the GSM/GPRS module is disabled most of the time. FMB640 will receive the SMS/GPRS message when it exits Deep Sleep mode.
All commands are case sensitive. When user tries to send SMS/GPRS message to FMM640 that operates in Deep Sleep mode, it cannot arrive to FMM640 device because the GSM/GPRS module is disabled most of the time. FMM640 will receive the SMS/GPRS message when it exits Deep Sleep mode.
If FMB640 is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.
If FMM640 is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.


==Common commands==
==Common commands==
Line 10: Line 10:
! style="width: 50px; background: black; color: white;" | Response
! style="width: 50px; background: black; color: white;" | Response
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB getstatus|getstatus]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM getstatus|getstatus]]''
| style="text-align: left; vertical-align: top;" | Modem Status information.
| style="text-align: left; vertical-align: top;" | Modem Status information.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB getcfgtime|getcfgtime]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM getcfgtime|getcfgtime]]''
| style="text-align: left; vertical-align: top;" | Date and Time of last successful configuration
| style="text-align: left; vertical-align: top;" | Date and Time of last successful configuration
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB getgps|getgps]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM getgps|getgps]]''
| style="text-align: left; vertical-align: top;" | Current GPS data and time
| style="text-align: left; vertical-align: top;" | Current GPS data and time
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB getnmeainfo|getnmeainfo]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM getnmeainfo|getnmeainfo]]''
| style="text-align: left; vertical-align: top;" | Nmea error debug sms.
| style="text-align: left; vertical-align: top;" | Nmea error debug sms.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB cpureset|cpureset]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM cpureset|cpureset]]''
| style="text-align: left; vertical-align: top;" | Reset CPU.
| style="text-align: left; vertical-align: top;" | Reset CPU.
| style="text-align: left; vertical-align: top;" | No
| style="text-align: left; vertical-align: top;" | No
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB defaultcfg|defaultcfg]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM defaultcfg|defaultcfg]]''
| style="text-align: left; vertical-align: top;" | Reset configuration to default.
| style="text-align: left; vertical-align: top;" | Reset configuration to default.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB getver|getver]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM getver|getver]]''
| style="text-align: left; vertical-align: top;" | Device / Modem / Code version information.
| style="text-align: left; vertical-align: top;" | Device / Modem / Code version information.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB getinfo|getinfo]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM getinfo|getinfo]]''
| style="text-align: left; vertical-align: top;" | Device runtime system information.
| style="text-align: left; vertical-align: top;" | Device runtime system information.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB deleterecords|deleterecords]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM deleterecords|deleterecords]]''
| style="text-align: left; vertical-align: top;" | Delete all records saved on FLASH.
| style="text-align: left; vertical-align: top;" | Delete all records saved on FLASH.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB getio|getio]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM getio|getio]]''
| style="text-align: left; vertical-align: top;" | Readout digital inputs and outputs, analog inputs.
| style="text-align: left; vertical-align: top;" | Readout digital inputs and outputs, analog inputs.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB banlist|banlist]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM banlist|banlist]]''
| style="text-align: left; vertical-align: top;" | Banlist information.
| style="text-align: left; vertical-align: top;" | Banlist information.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB crashlog|crashlog]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM crashlog|crashlog]]''
| style="text-align: left; vertical-align: top;" | Crash log information.
| style="text-align: left; vertical-align: top;" | Crash log information.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB delete_all_sms|delete_all_sms]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM delete_all_sms|delete_all_sms]]''
| style="text-align: left; vertical-align: top;" | Delete all read SMS.
| style="text-align: left; vertical-align: top;" | Delete all read SMS.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB braminfo|braminfo]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM braminfo|braminfo]]''
| style="text-align: left; vertical-align: top;" | BatRam info.
| style="text-align: left; vertical-align: top;" | BatRam info.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB getgnss|getgnss]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM getgnss|getgnss]]''
| style="text-align: left; vertical-align: top;" | Current GNSS information.
| style="text-align: left; vertical-align: top;" | Current GNSS information.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB resetlimits|resetlimits]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM resetlimits|resetlimits]]''
| style="text-align: left; vertical-align: top;" | Resets data counters.
| style="text-align: left; vertical-align: top;" | Resets data counters.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB scanfms|scanfms]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM scanfms|scanfms]]''
| style="text-align: left; vertical-align: top;" | Shows FMS elements that can be read from vehicle
| style="text-align: left; vertical-align: top;" | Shows FMS elements that can be read from vehicle
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB readio|readio #]]''
! style="text-align: left; vertical-align: top;" | ''[[FMM readio|readio #]]''
| style="text-align: left; vertical-align: top;" | Returns IO status, # AVL ID.
| style="text-align: left; vertical-align: top;" | Returns IO status, # AVL ID.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | {{{cmd_setdigout|''[[FMB setdigout|setdigout]] XXXX Y1 Y2 Y3 Y4''}}}
! style="text-align: left; vertical-align: top;" | {{{cmd_setdigout|''[[FMM setdigout|setdigout]] XXXX Y1 Y2 Y3 Y4''}}}
| style="text-align: left; vertical-align: top;" | Set digital output.{{{txt_setdigout|<br/>1. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.<br/>2. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.<br/>3. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT3.<br/>4. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT4.<br/>Y1 – timeout value for DOUT1 if needed (in seconds).<br/>Y2 – timeout value for DOUT2 if needed (in seconds).<br/>Y3 – timeout value for DOUT3 if needed (in seconds).<br/>Y4 – timeout value for DOUT4 if needed (in seconds).}}}
| style="text-align: left; vertical-align: top;" | Set digital output.{{{txt_setdigout|<br/>1. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.<br/>2. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.<br/>3. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT3.<br/>4. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT4.<br/>Y1 – timeout value for DOUT1 if needed (in seconds).<br/>Y2 – timeout value for DOUT2 if needed (in seconds).<br/>Y3 – timeout value for DOUT3 if needed (in seconds).<br/>Y4 – timeout value for DOUT4 if needed (in seconds).}}}
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB getparam|getparam]] #''
! style="text-align: left; vertical-align: top;" | ''[[FMM getparam|getparam]] #''
| style="text-align: left; vertical-align: top;" | Readout parameter value according entered ID.<br/># - ID value.
| style="text-align: left; vertical-align: top;" | Readout parameter value according entered ID.<br/># - ID value.
| style="text-align: left; vertical-align: top;" | Yes
| style="text-align: left; vertical-align: top;" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB setparam|setparam]] #:#''
! style="text-align: left; vertical-align: top;" | ''[[FMM setparam|setparam]] #:#''
| style="text-align: left; vertical-align: top;" rowspan="2" | Sets selected parameter value.<br/>
| style="text-align: left; vertical-align: top;" rowspan="2" | Sets selected parameter value.<br/>
1.# - first [[FMB Device Family Parameter list|ID value]].<br/>
1.# - first [[FMM Device Family Parameter list|ID value]].<br/>
2.# - New first Parameter Value.<br/>
2.# - New first Parameter Value.<br/>
3.# - second [[FMB Device Family Parameter list|ID value]].<br/>
3.# - second [[FMM Device Family Parameter list|ID value]].<br/>
4.# - New second Parameter Value.<br/>
4.# - New second Parameter Value.<br/>
5.# - third [[FMB Device Family Parameter list|ID value]].<br/>
5.# - third [[FMM Device Family Parameter list|ID value]].<br/>
6.# - New third Parameter Value.<br/>
6.# - New third Parameter Value.<br/>
SMS command is limited to 160 characters.
SMS command is limited to 160 characters.
| style="text-align: left; vertical-align: top;" rowspan="2" | Yes
| style="text-align: left; vertical-align: top;" rowspan="2" | Yes
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB setparam|setparam]] #:#;#:#;…''
! style="text-align: left; vertical-align: top;" | ''[[FMM setparam|setparam]] #:#;#:#;…''
|-
|-
! style="text-align: left; vertical-align: top;" | ''[[FMB flush|flush]] #,#,#,#,#,#,#''
! style="text-align: left; vertical-align: top;" | ''[[FMM flush|flush]] #,#,#,#,#,#,#''
| style="text-align: left; vertical-align: top;" | Redirects device to other server.<br/>
| style="text-align: left; vertical-align: top;" | Redirects device to other server.<br/>
1.# - IMEI.<br/>
1.# - IMEI.<br/>
Line 116: Line 116:
|}
|}


==Commands related to features==
{| class="wikitable"
|+
! style="width: 150px; background: black; color: white;"  | Command
! style="width: 500px; background: black; color: white;" | Description
! style="width: 50px; background: black; color: white;" | Response
|-
! style="text-align: left; vertical-align: top;" | ''[[FMM odoset|odoset]]:#''
| style="text-align: left; vertical-align: top;" | Set total odometer value.<br/># - new odometer value in m.
| style="text-align: left; vertical-align: top;" | Yes
|-
! style="text-align: left; vertical-align: top;" | ''[[FMM odoget|odoget]]''
| style="text-align: left; vertical-align: top;" | Display current odometer value.
| style="text-align: left; vertical-align: top;" | Yes
|-
! style="text-align: left; vertical-align: top;" | ''[[FMM odinfo|odinfo]]''
| style="text-align: left; vertical-align: top;" | Odometer Debug info.
| style="text-align: left; vertical-align: top;" | Yes
|-
|}
{{{sect_can|{{Template:FMM640 CAN SMS/GRPS commands}}}}}
==Commands related to LV-CAN200/ALL-CAN300==
{| class="wikitable"
|+
! style="width: 150px; background: black; color: white;"  | Command
! style="width: 500px; background: black; color: white;" | Description
! style="width: 50px; background: black; color: white;" | Response
|-
! style="text-align: left; vertical-align: top;" | ''lvcansetprog #''
| style="text-align: left; vertical-align: top;" | Set program number to LV-CAN200/ ALL-CAN300 that is connected to {{{model|FMM640}}}.<br/># three digit number that identity vehicle.
| style="text-align: left; vertical-align: top;" | Yes
|-
! style="text-align: left; vertical-align: top;" | ''lvcansimpletacho #''
| style="text-align: left; vertical-align: top;" | Add or remove simpletacho start byte.<br/># - 0 or 1 (0 – don’t add start byte, 1 – add start byte).
| style="text-align: left; vertical-align: top;" | No
|-
! style="text-align: left; vertical-align: top;" | ''lvcangetprog''
| style="text-align: left; vertical-align: top;" | Get program number from LV-CAN200/ ALL-CAN300 that is connected to {{{model|FMM640}}}.
| style="text-align: left; vertical-align: top;" | Yes
|-
! style="text-align: left; vertical-align: top;" | ''[[FMM lvcangetinfo|lvcangetinfo]]''
| style="text-align: left; vertical-align: top;" | Get information about connected LV-CAN200/ALL-CAN300.
| style="text-align: left; vertical-align: top;" | Yes
|-
! style="text-align: left; vertical-align: top;" | ''[[FMM lvcanclear|lvcanclear]] #''
| style="text-align: left; vertical-align: top;" | Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. <br/># - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted))..
| style="text-align: left; vertical-align: top;" | Yes
|-
|}




[[Category:FMM640 Manual]]
[[Category:FMM640 Manual]]

Revision as of 08:06, 26 August 2019

Main Page > EOL Products > FMM640 > FMM640 Manual > FMM640 SMS/GPRS command list

All commands are case sensitive. When user tries to send SMS/GPRS message to FMM640 that operates in Deep Sleep mode, it cannot arrive to FMM640 device because the GSM/GPRS module is disabled most of the time. FMM640 will receive the SMS/GPRS message when it exits Deep Sleep mode. If FMM640 is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.

Common commands

Command Description Response
getstatus Modem Status information. Yes
getcfgtime Date and Time of last successful configuration Yes
getgps Current GPS data and time Yes
getnmeainfo Nmea error debug sms. Yes
cpureset Reset CPU. No
defaultcfg Reset configuration to default. Yes
getver Device / Modem / Code version information. Yes
getinfo Device runtime system information. Yes
deleterecords Delete all records saved on FLASH. Yes
getio Readout digital inputs and outputs, analog inputs. Yes
banlist Banlist information. Yes
crashlog Crash log information. Yes
delete_all_sms Delete all read SMS. Yes
braminfo BatRam info. Yes
getgnss Current GNSS information. Yes
resetlimits Resets data counters. Yes
scanfms Shows FMS elements that can be read from vehicle Yes
readio # Returns IO status, # AVL ID. Yes
setdigout XXXX Y1 Y2 Y3 Y4 Set digital output.
1. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.
2. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.
3. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT3.
4. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT4.
Y1 – timeout value for DOUT1 if needed (in seconds).
Y2 – timeout value for DOUT2 if needed (in seconds).
Y3 – timeout value for DOUT3 if needed (in seconds).
Y4 – timeout value for DOUT4 if needed (in seconds). 		Yes
getparam # Readout parameter value according entered ID.
# - ID value. 		Yes
setparam #:# Sets selected parameter value.

1.# - first ID value.
2.# - New first Parameter Value.
3.# - second ID value.
4.# - New second Parameter Value.
5.# - third ID value.
6.# - New third Parameter Value.
SMS command is limited to 160 characters.

Yes
setparam #:#;#:#;…
flush #,#,#,#,#,#,# Redirects device to other server.

1.# - IMEI.
2.# - APN.
3.# - LOGIN.
4.# - PASS.
5.# - IP.
6.# - PORT.
7.# - MODE (0-TCP/1-UDP).

Yes

Commands related to features

Command Description Response
odoset:# Set total odometer value.
# - new odometer value in m. 		Yes
odoget Display current odometer value. Yes
odinfo Odometer Debug info. Yes

Template:FMM640 CAN SMS/GRPS commands

Commands related to LV-CAN200/ALL-CAN300

Command Description Response
lvcansetprog # Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMM640.
# three digit number that identity vehicle. 		Yes
lvcansimpletacho # Add or remove simpletacho start byte.
# - 0 or 1 (0 – don’t add start byte, 1 – add start byte). 		No
lvcangetprog Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMM640. Yes
lvcangetinfo Get information about connected LV-CAN200/ALL-CAN300. Yes
lvcanclear # Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values.
# - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).. 		Yes
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=FMM640_SMS/GPRS_command_list&oldid=43474"