Difference between revisions of "Requirements for eSIM"
Line 25: | Line 25: | ||
'''4. eSIM can be used with most of Teltonika fleet management devices:''' | '''4. eSIM can be used with most of Teltonika fleet management devices:''' | ||
− | [[File:DeviceList.jpg| | + | [[File:DeviceList.jpg|705px|left]] |
Revision as of 17:15, 24 September 2019
Main Page > Frequently Asked Questions - FAQ > Requirements for eSIMAn embedded-SIM (eSIM) or embedded universal integrated circuit card (eUICC) is a form of programmable SIM card that is embedded directly into a device. The surface mount format provides the same electrical interface as the full size, 2FF and 3FF SIM cards, but is soldered to a circuit board as part of the manufacturing process. In machine to machine (M2M) applications where there is no requirement to change the SIM card, this avoids the requirement for a connector, improving reliability and security. An eSIM can be provisioned remotely; end-users can add or remove operators without the need to physically swap a SIM from the device.
In order to use eSIM with Teltonika FM devices some basic requirements must be met.
1. eSIM dimensions
Must match standard MFF2 eSIM size. A drawing is below:
2. eSIM pin-out
There are two default eSIM pin-outs:
The only difference in pin-outs is the IO pin – 2 or 3. Both versions of pin-outs are suitable for devices with eSIM.
3. Requirements for eSIM packing reel:
13“ in diameter.
4. eSIM can be used with most of Teltonika fleet management devices: