Difference between revisions of "Template:FMB96X First start card"
From Wiki Knowledge Base | Teltonika GPS
Danielekrau (talk | contribs) |
|||
| Line 27: | Line 27: | ||
| − | [[Image:FMB964_SIM_Battery_1. | + | [[Image:FMB964_SIM_Battery_1.png|280px]][[Image:FMB964_sim_battery_insert_2.png|280px]][[Image:FMB964_sim_battery_insert_3.png|280px]][[Image:FMB964_sim_battery_insert_4.png|280px]] |
Revision as of 13:12, 30 September 2019
Special and smart tracker with wide power supply range and high capacity internal Ni-MH battery
How to insert Micro-SIM card
- Gently remove FMB96X cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Attach device cover back.
- Device is ready to be connected.
- Gently remove FMB96X cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
- Attach device cover back. Device is ready to be connected.
 |
Note: Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.
