Difference between revisions of "Template:FMC64 First start card"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "centre <b>{{{description|Leading GNSS/GSM/Blue-tooth Terminal for advanced applications}}}</b> {{{pic|400px|right}}}...")
 
Line 3: Line 3:
  
 
<b>{{{description|Leading GNSS/GSM/Blue-tooth Terminal for advanced applications}}}</b>
 
<b>{{{description|Leading GNSS/GSM/Blue-tooth Terminal for advanced applications}}}</b>
−
{{{pic|[[Image:Fmb640.png|400px|right]]}}}
+
{{{pic|[[Image:FMC640_00.png|400px|right]]}}}
  
  

Revision as of 15:01, 26 November 2019

Qsg rut950 teltonika.PNG


Leading GNSS/GSM/Blue-tooth Terminal for advanced applications

FMC640 00.png



How to insert Micro-SIM card

  1. Gently remove FMB1YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is not pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  3. Attach device cover and put the screws from the package into the holes.
  4. Screw all 4 screws.
  5. Device is ready to be connected.

1 fmb640 SIM.png2 fmb640 SIM.png 3 fmb640 SIM.png4 fmb640 SIM.pngFMB640 sim insert-6.png


Alert.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

How to insert microSD card

  1. Push microSD card lock case.
  2. Open microSD card locker.
  3. Correctly insert microSD card into slot.
  4. Close microSD card locker.
  5. Push microSD card lock case to locked position.

Sd card 1.png Sd card 2.png Sd card 3.png Sd card 4.png Sd card 5.png

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMC64_First_start_card&oldid=49686"