Difference between revisions of "FMB208 LED status"
From Wiki Knowledge Base | Teltonika GPS
(Created page with "{{FMB20x_LED_status|model=FMB208}} Category:FMB208 Manual") |
m (Protected "FMB208 LED status" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(No difference)
| |
Revision as of 21:01, 2 April 2020
Main Page > Advanced Trackers > FMB208 > FMB208 Manual > FMB208 LED statusThis section is an explanation of LED indications on an FMB208 device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |
