Geofence Solution in the Event of Pandemic

Project description

One of the more advanced features of GPS trackers is the ability to create Geofence scenarios in a real-time with triggered alerts. Geofences are designated areas or zones that can be defined on a map or as a distance from the specific location. The feature may help to comply with some pandemic lockdown measures and greatly benefit private car owners, families, corporate fleet managers and business owners. All Teltonika GPS tracker models have Geofence as a standard feature.

What you need for a solution?

• Geofence solution is supported by all Teltonika devices. To show this scenario, we will be using the FMM130 model.
• The SIM card in order to receive data to your server.
• Teltonika Configurator to make the configurations for your Teltonika device.
• FOTA WEB to send the configurations to your device remotely.

Installation

Since Geofence can be used in all of Teltonika devices, it is important to follow your specific device mounting recommendations. This is because if you were to install the tracker following the instructions of a different one, your device may not work properly in the end. Also, we offer a wide range of trackers that have different connectors, some of the devices we offer are "Plug and Track" (devices that have OBD-II connectors), other may demand more wiring work to be done. The list of all Teltonika Fleet Management devices can be found here.

Configuration

2. Configuration of Manual Geofence feature

Once the first start guide is analysed, we can proceed with the Geofence configuration. To start off, we need to configure the GRPS settings.

Parameter ID – Parameter name GPRS settings:

• 2001 – APN
• 2002 – APN username (if there are no APN username, empty field should be left)
• 2003 – APN password (if there are no APN password, empty field should be left)

Server settings:

• 2004 – Domain
• 2005 – Port
• 2006 – Data sending protocol (0 – TCP, 1 – UDP)

After successful GPRS/SERVER settings configuration, FMM130 device will synchronize time and update records to the configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator.

Manual Geofence settings:

• 20100 - Feature priority (0 - Disable, 1 - Low, 2 - High, 3 - Panic)

• 20101 - Generate Event (0 - No Event, 1 - On Exit, 2 - On Entrance, 3 - On Both)
• 20102 - Eventual Records (0 - Disable, 1 - Enable)

• 20103 - Frame Border (m)
• 20104 - Shape Type (0 - Circle, 1 - Rectangle)
• 20105 - Radius (m)
• 20106 - Coordinate Y1
• 20107 - Coordinate X1
• 20108 - Coordinate Y2
• 20109 - Coordinate X2

• 20110 - Overspeeding (0 - Disable, 1 - Enable)

• 20111 - Max allowed speed (km/h)

• 7025 - Phone Number
• 8025 - SMS Text

Note: Radius is only calculated if the chosen Shape Type is a Circle. In this example, Radius cannot be seen since the shape chosen is the Rectangle. Also, Latitude Y2 and Longitude X2 are only used when Rectangle is the chosen shape.

It is also important to mention that the map in the Manual Geofence function section has a few features as well if you wish to make some adjustments using the interface:

It is possible to draw the Geofence area manually by selecting the Rectangle or the Circle icon on the left. That way, it is not necessary to know the exact coordinates of the wanted area, as long as it is marked on the map correctly.

Once that is done, the latitude and the longitude fields will be filled in automatically.

If you wish to delete your Geofence area, you can click the "Delete geozone" button. That way, the area is deleted and the configurations made are restored to default settings.

In case there are more than one zones available, by clicking on one of them will bring up its layout details.

The last button on the interface is used to zoom in on all of the available geozones.

Quickstart: From default configuration to Geofence crossing detection in two SMS:

"  setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"

"  setparam 20100:2;20101:2;20104:1;20106:latitudeY1;20107:longitudeX1;20108:latitudeY2;20109:longitudeX2"

Note: We're sending two instead of one configuration messages since one SMS can contain up to 160 characters. For this scenario, we exceed the maximum allowed character amount. Therefore, we split the message into two.

Parsing

2. Parsing example:

Unparsed received data in hexadecimal stream
000000000000004408010000017749BC8E70000F07B516209CD4FA 00000000000000F00C05EF00F0001504C800450205B50000B60000 4217BA43101244000002F1000060191000000040000100001220

AVL Data Packet
AVL Data Packet Part	HEX Code Part
Zero Bytes	00 00 00 00
Data Field Length	00 00 00 44
Codec ID	08 (Codec 8)
Number of Data 1 (Number of Total Records)	01
Timestamp	00 00 01 77 49 BC 8E 70 (Thursday January 28 16:03:50 UTC 2021)
Priority	00
Longitude	0F 07 B5 16
Latitude	20 9C D4 FA
Altitude	00 00
Angle	00 00
Satellites	00
Speed	00 00
Event IO ID	F0 (AVL ID: 240, Name: Movement)
N of Total ID	0C
N1 of One Byte IO	05
1’st IO ID	EF (AVL ID: 239, Name: Ignition)
1’st IO Value	00
2’nd IO ID	F0 (AVL ID: 240, Name: Movement)
2’nd IO Value	00
3’rd IO ID	15 (AVL ID: 21, Name: GSM Signal)
3’rd IO Value	04
4'th IO ID	C8 (AVL ID: 200, Name: Sleep Mode)
4'th IO Value	00
5'th IO ID	45 (AVL ID: 69, Name: GNSS Status)
5'th IO Value	02
N1 of Two Byte IO	05
1’st IO ID	B5 (AVL ID: 181, Name: GNSS PDOP)
1’st IO Value	00 00
2’nd IO ID	B6 (AVL ID: 182, Name: GNSS HDOP)
2’nd IO Value	00 00
3’rd IO ID	42 (AVL ID: 66, Name: External Voltage)
3’rd IO Value	17 BA
4'th IO ID	43 (AVL ID: 67, Name: Battery Voltage)
4'th IO Value	10 12
5'th IO ID	44 (AVL ID: 68, Name: Battery Current)
5'th IO Value	00 00
N4 of Four Bytes IO	02
1’st IO ID	F1 (AVL ID: 241, Name: Active GSM Operator)
1’st IO Value	00 00 60 19
2’nd IO ID	10 (AVL ID: 16, Name: Total Odometer)
2’nd IO Value	00 00 00 40
N8 of Eight Bytes IO	00
Number of Data 2 (Number of Total Records)	01
CRC-16	00 00 12 20