Difference between revisions of "Geofence Solution in the Event of Pandemic"

From Wiki Knowledge Base | Teltonika GPS
Line 272: Line 272:
 
TAVL:  
 
TAVL:  
  
[[File:Tavlfile.jpeg|alt=|frameless|left|1153x1153px]]
+
[[File:Tavlfile.jpg|alt=|frameless|left|1153x1153px]]

Revision as of 18:15, 4 February 2021

Main Page > General Information > Usage scenarios > Geofence Solution in the Event of Pandemic

Project description

One of the more advanced features of GPS trackers is the ability to create Geofence scenarios in a real-time with triggered alerts. Geofences are designated areas or zones that can be defined on a map or as a distance from the specific location. The feature may help to comply with some pandemic lockdown measures and greatly benefit private car owners, families, corporate fleet managers and business owners. All Teltonika GPS tracker models have Geofence as a standard feature.

What you need for a solution?

  • Geofence solution is supported by all Teltonika devices. To show this scenario, we will be using the FMM130 model.
  • The SIM card in order to receive data to your server.
  • Teltonika Configurator to make the configurations for your Teltonika device.
  • FOTA WEB to send the configurations to your device remotely.

Installation

Since Geofence can be used in all of Teltonika devices, it is important to follow your specific device mounting recommendations. This is because if you were to install the tracker following the instructions of a different one, your device may not work properly in the end. Also, we offer a wide range of trackers that have different connectors, some of the devices we offer are "Plug and Track" (devices that have OBD-II connectors), other may demand more wiring work to be done. The list of all Teltonika Fleet Management devices can be found here.

Configuration

1. Prerequisites:

1.1. Read through First start guide

1.2. Understanding what manual Geofence has to offer.

2. Configuration of Manual Geofence feature

Once the first start guide is analysed, we can proceed with the Geofence configuration. To start off, we need to configure the GRPS settings.

Parameter ID – Parameter name GPRS settings:

  • 2001 – APN
  • 2002 – APN username (if there are no APN username, empty field should be left)
  • 2003 – APN password (if there are no APN password, empty field should be left)


Server settings:

  • 2004 – Domain
  • 2005 – Port
  • 2006 – Data sending protocol (0 – TCP, 1 – UDP)


After successful GPRS/SERVER settings configuration, FMM130 device will synchronize time and update records to the configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator.

Manual Geofence settings:

  • 20100 - Feature priority (0 - Disable, 1 - Low, 2 - High, 3 - Panic)
  • 20101 - Generate Event (0 - No Event, 1 - On Exit, 2 - On Entrance, 3 - On Both)
  • 20102 - Eventual Records (0 - Disable, 1 - Enable)


  • 20103 - Frame Border (m)
  • 20104 - Shape Type (0 - Circle, 1 - Rectangle)
  • 20105 - Radius (m)
  • 20106 - Coordinate Y1
  • 20107 - Coordinate X1
  • 20108 - Coordinate Y2
  • 20109 - Coordinate X2


  • 20110 - Overspeeding (0 - Disable, 1 - Enable)
  • 20111 - Max allowed speed (km/h)


  • 7025 - Phone Number
  • 8025 - SMS Text


Note: Radius is only calculated if the chosen Shape Type is a Circle. In this example, Radius cannot be seen since the shape chosen is the Rectangle. Also, Latitude Y2 and Longitude X2 are only used when Rectangle is the chosen shape.


Manual geofence map.jpg

It is also important to mention that the map in the Manual Geofence function section has a few features as well if you wish to make some adjustments using the interface:


It is possible to draw the Geofence area manually by selecting the Rectangle or the Circle icon on the left. That way, it is not necessary to know the exact coordinates of the wanted area, as long as it is marked on the map correctly.

Once that is done, the latitude and the longitude fields will be filled in automatically.


If you wish to delete your Geofence area, you can click the "Delete geozone" button. That way, the area is deleted and the configurations made are restored to default settings.


In case there are more than one zones available, by clicking on one of them will bring up its layout details.


The last button on the interface is used to zoom in on all of the available geozones.




Quickstart: From default configuration to Geofence crossing detection in two SMS:

"  setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
"  setparam 20100:2;20101:2;20104:1;20106:latitudeY1;20107:longitudeX1;20108:latitudeY2;20109:longitudeX2"

Note: We're sending two instead of one configuration messages since one SMS can contain up to 160 characters. For this scenario, we exceed the maximum allowed character amount. Therefore, we split the message into two.

Parsing

1.Prerequisites:

1.1. Open TCP/UDP port

1.2. Read Java parser first start guide

2. Parsing example:

Unparsed received data in hexadecimal stream
00000000000000460801000001776D581890010F07C39A

209CE0C2009C009D05000F9B0D06EF01F0001505C80045019B0105B5000BB6000 A424257430F8044000002F1000060191000000BE1000100005139


AVL Data Packet
AVL Data Packet Part HEX Code Part
Zero Bytes 00 00 00 00
Data Field Length 00 00 00 46
Codec ID 08 (Codec 8)
Number of Data 1 (Number of Total Records) 01
Timestamp 00 00 01 77 49 BC 8E 70 (Thursday, February 4, 2021 2:00:26 PM)
Priority 01
Longitude 0F 07 C3 9A
Latitude 20 9C E0 C2
Altitude 00 9C
Angle 00 9D
Satellites 05
Speed 00 0F
Event IO ID 9B (AVL ID: 155, Name: Geofence zone 01)
N of Total ID 0D
N1 of One Byte IO 06
1’st IO ID EF (AVL ID: 239, Name: Ignition)
1’st IO Value 01
2’nd IO ID F0 (AVL ID: 240, Name: Movement)
2’nd IO Value 00
3’rd IO ID 15 (AVL ID: 21, Name: GSM Signal)
3’rd IO Value 05
4'th IO ID C8 (AVL ID: 200, Name: Sleep Mode)
4'th IO Value 00
5'th IO ID 45 (AVL ID: 69, Name: GNSS Status)
5'th IO Value 01
6'th IO ID 9B (AVL ID: 155, Name: Geofence zone 01)
6'th IO Value 01 (00 – target left zone, 01 – target entered zone, 02 – over speeding end, 03 – over speeding start)

N1 of Two Byte IO 05
1’st IO ID B5 (AVL ID: 181, Name: GNSS PDOP)
1’st IO Value 00 0B
2’nd IO ID B6 (AVL ID: 182, Name: GNSS HDOP)
2’nd IO Value 00 0A
3’rd IO ID 42 (AVL ID: 66, Name: External Voltage)
3’rd IO Value 42 57
4'th IO ID 43 (AVL ID: 67, Name: Battery Voltage)
4'th IO Value 0F 80
5'th IO ID 44 (AVL ID: 68, Name: Battery Current)
5'th IO Value 00 00
N4 of Four Bytes IO 02
1’st IO ID F1 (AVL ID: 241, Name: Active GSM Operator)
1’st IO Value 00 00 60 19
2’nd IO ID 10 (AVL ID: 16, Name: Total Odometer)
2’nd IO Value 00 00 0B E1
N8 of Eight Bytes IO 00
Number of Data 2 (Number of Total Records) 01
CRC-16 00 00 51 39

In platform

TAVL: