Difference between revisions of "Template:FMB640 First start card"
From Wiki Knowledge Base | Teltonika GPS
KarolisKru (talk | contribs) (Created page with "centre <b>{{{description|Leading LTE/GNSS/BLE Terminal for advanced applications}}}</b> {{{pic|400px|right}...") |
KarolisKru (talk | contribs) |
||
| Line 19: | Line 19: | ||
# '''Screw''' in all screws. Device is ready to be mounted. | # '''Screw''' in all screws. Device is ready to be mounted. | ||
| − | [[Image:{{{ | + | [[Image:{{{sim_insert_pic1|{{{model|Fmb640}}}FMB640111.png}}}|260px]][[Image:{{{sim_insert_pic2|{{{model|Fmb640}}}-FMB640222.png}}}|260px]][[Image:{{{sim_insert_pic3|{{{model|Fmb640}}}FMB640333.png}}}|260px]][[Image:{{{sim_insert_pic4|{{{model|Fmb640}}}FMB640444.png}}}|260px]] |
| − | |||
{| | {| | ||
Revision as of 08:12, 21 July 2021
Leading LTE/GNSS/BLE Terminal for advanced applications
How to insert SIM card and connect the battery
- Unscrew 4 screws counterclockwise that are located on the bottom of the device.
- Remove the cover.
- Insert SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
- Connect battery as shown to device.
- After configuration, see “PC Connection (Windows)”, attach device cover back.
- Screw in all screws. Device is ready to be mounted.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card into FMB640
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.
