Template:AndrTest1: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{ #if: {{{SIMtray| | {{ #if: {{{SIMtray|}}} | | ||
{{{fmb_USBpwr_tray|{{{model|FMB1YX}}} device can be connected to PC for configuration in two different ways: | {{{fmb_USBpwr_tray|{{{model|FMB1YX}}} device can be connected to PC for configuration in two different ways: | ||
#'''DC with Bluetooth''' | #'''DC with Bluetooth''' | ||
Revision as of 17:01, 21 September 2021
FMB1YX device can be connected to PC for configuration in two different ways:
- DC with Bluetooth
- Power-up FMB1YX with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED behaviour description”.
- FMB1YX Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device > Bluetooth. Choose your device named – “FMB1YX_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done.
- With Micro-USB cable
- Remove TOP cover
- Connect Micro-USB cable to device and connect to computer USB port. LED’s should start blinking, see “LED behaviour description”.
- Remove TOP cover
- First time you will need to install USB drivers, see "How to install USB drivers (Windows)"
- GSM signal will not be available and device will not open GPRS because TOP casing part is removed and GSM antenna is inserted into TOP casing part.