Difference between revisions of "Wialon+DUAL CAM solution"
| Line 17: | Line 17: | ||
Configure Domain and Port for the device to send data to the Wialon. | Configure Domain and Port for the device to send data to the Wialon. | ||
| − | This information you will find then you register device in Wialon | + | This information you will find then you register the device in Wialon |
| − | [[File: | + | [[File:Server222.jpg|alt=|frameless]] |
'''Step 3''' | '''Step 3''' | ||
| Line 28: | Line 28: | ||
'''Step 4''' | '''Step 4''' | ||
| − | Dual Cam server settings will be | + | Dual Cam server settings will be different: |
Domain: 193.193.165.165 | Domain: 193.193.165.165 | ||
| − | Port: | + | Port: 22148 |
| − | [[File: | + | [[File:Cemar server.jpg|alt=|frameless]] |
'''Step 5''' | '''Step 5''' | ||
Revision as of 14:04, 16 March 2022
Solution description
For monitoring our device we have a lot of third-party platforms but only one which supports the DUAL CAM solution. In this chapter, we will show you how to configure the device and also how to configure the Wialon platform for receiving information from DUAL CAM.
Device configuration
Step 1
Enable codec 8 extended.
Step 2
Configure Domain and Port for the device to send data to the Wialon. This information you will find then you register the device in Wialon
Step 3 Go to RS232/RS485 and enable DualCam and configure the DualCam image sending setting for your needs.
Step 4
Dual Cam server settings will be different:
Domain: 193.193.165.165
Port: 22148
Step 5
Dual Cam Video settings, for the video settings only select Video frame rate to 30 FPS.
Note: Do not activate Video Sending Triggers in the configurator, because if you set this setting and device triggered video the Wialon platform will not accept it. So only from the Wialon side must be set video commands in the next chapter Wialon settings we will show how to configure it.
Wialon configuration
Step 1 Login into Wialon and go to the Units and select New.
Step 2
Configure the device and activate DualCam according to the picture. Note: You must enter device IMEI in Unique ID so only then the device will work correctly with Wialon.
Step 3
