DualCam Firmware errata: Difference between revisions

Revision as of 13:36, 14 July 2022

Main Page > Video Solutions > Teltonika DualCam > DualCam Firmware errata

Firmware Version

We are always improving our device's performance, stability, and reliability.
This document describes DualCAM platform and FMX125 devices' firmware improvements, changes, new features implementations as well as current firmware release version.

Firmware download for FMX125/FMX225 and DualCam

Link: Firmware

Password: 3RpOAf96

Firmware for FMX125


FIRMWARE VERSION	RELEASE DATE	CHANGES
03.27.13.Rev.362	2022-06-17	NITZ gives unstable time Single side of camera footage is uploaded MEIG modem file upload issue DualCam base update for MEIG support
03.27.07.Rev.365	2022-03-17	Minor improvements DualCam metadata timestamp mismatch Increased timeout for video data pack request CRC calculation mismatch after file upload resume Periodic image sending Add camera time zone parameter Added periodic time check and sync for the camera Adjusted DualCam command timeouts Added fixes and workarounds for cam command fails FPS parameter added to the meta data command
03.27.07.Rev.361	2021-09-17	Minor improvements
03.27.07.Rev.360	2021-08-30	Extended video and image sending configuration Added Domain and Port parameters to “camreq” command Extended “camreq” response Added “camgetver” command Fixed timestamp for video meta data Improved system stability and fixed general bugs
03.27.03.Rev.104	2021-06-18	Added image sending trigger Ability to configure multiple video triggers Always enabled DualCam scenario support Improved system stability and fixed general bugs
03.27.00.Rev.100	2021-02-19	Initial release

Firmware for DualCam


DUALCAM FIRMWARE VERSION	RELEASE DATE	CHANGES
V2.2.3	2022-05-20	Added watch dog for camera to restart it self if camera will stuck
V2.2.2	2022-01-06	Added video buffer pool,repair the write rate of the SD card Solved the bug when 35min can not download video Changed the logic of FPS setting and switching,the video saves the exact FPS of each video packet in the PTM_FRAME Improved the picture and video quality,image edge trimming Added flash upgrade mode Modified command to get Image quality Resolved the problem that the camera restarts after switching the OSD switch Optimized setting video frame rate without restarting the camera
V1.9.3	2021-07-15	Improved stability and fixes of camera data packets
V1.9.2	2021-06-02	Fixed issue with front camera crash if picture size is too large Added command to check the camera version Improved system stability and fixed general bugs
V1.9.0	2021- 02-19	Initial release

@@ Line 6: / Line 6: @@
 This document describes '''DualCAM platform and FMX125''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.
-==Firmware  download for FMX125==
+==Firmware download for FMX125/FMX225 and DualCam==
 Link: [https://drive.teltonika.lt/d/e5c4b09a60b74fa5b6a0/ Firmware]
 Password: 3RpOAf96
+==Firmware for FMX125==
 {| class="wikitable" style="width: 100%;"
 |+
-FMX125 Firmware
 ! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
 ! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
@@ Line 71: / Line 72: @@
 |}
+==Firmware for DualCam ==
 {| class="wikitable" style="width: 100%;"
 |+
-==Firmware  download for DualCam firmware==
 ! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DUALCAM FIRMWARE VERSION
 ! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE