Difference between revisions of "BTSMP1 Product Change Notifications"

From Wiki Knowledge Base | Teltonika GPS
Line 6: Line 6:
  
  
 +
 +
== 2022.12.14: Base firmware update ==
 +
We would like to inform you about the base firmware update for BTSX devices starting from January 1st, 2023. New production firmware version will be 1.2.8.R.2
 +
{| class="wikitable"
 +
|+
 +
! colspan="3" |Change description
 +
|-
 +
|Change type
 +
| colspan="2" |Firmware update
 +
|-
 +
| rowspan="2" |Detailed description
 +
| colspan="2" |Improvements from last production firmware are listed in [[BTS firmware errata]] page
 +
|-
 +
|Old version:
 +
BTSX.Ver.1.2.8.R.1
 +
|New version:
 +
BTSX.Ver.1.2.8.R2
 +
|-
 +
|Change reasons
 +
| colspan="2" |New base version in factory
 +
|-
 +
|Product release date
 +
| colspan="2" |2023 January
 +
|}
  
 
== 2022.09.09: BOT Laser Printing Changes ==
 
== 2022.09.09: BOT Laser Printing Changes ==

Revision as of 16:06, 14 December 2022

Product change notifications (PCN) is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc. This page stores information regarding changes to the BTSMP1 tracking device. Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).


2022.12.14: Base firmware update

We would like to inform you about the base firmware update for BTSX devices starting from January 1st, 2023. New production firmware version will be 1.2.8.R.2

Change description
Change type Firmware update
Detailed description Improvements from last production firmware are listed in BTS firmware errata page
Old version:

BTSX.Ver.1.2.8.R.1

New version:

BTSX.Ver.1.2.8.R2

Change reasons New base version in factory
Product release date 2023 January

2022.09.09: BOT Laser Printing Changes

We would like to inform you, that laser printing of the BTSMP1 device was updated in the factory in September 2022.

Change description
Change type External/visual
Detailed description Bot laser printing design changed
Old version:
GLM005 BTSMP1 graviravimas v1.6.pngBTSMP1 graviravimas v1.6-apacia.png
New version:
BTSMP1 graviravima1.8-virsus.pngBTSMP1 graviravimas v1.8-apacia.png.png
Change reasons

1. Added SN number to casing TOP
2. Added Telec certification to casing BOT

Product release date October 2022
Affected products
Model Affected order codes Order code changes
BTSMP1 BTSMP1****** New laser engraving
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2022.07.21: Base firmware update

We would like to inform you about the base firmware update for BTSX devices starting from July 21st, 2022. New production firmware version will be 1.2.8

Change description
Change type Firmware update
Detailed description Key improvements from last production firmware are listed in BTS firmware errata page
Old version:

BTSX.Ver.1.2.1

New version:

BTSX.Ver.1.2.8

Change reasons New base version
Product release date 2022 July
Affected products
Change type Default order code
BTSMP1 BTSMP1******* order codes with base Firmware
Detailed description Old version: New version:
BTSMP15QB801 BTSMP14NB801
BTSMP15QE501 BTSMP14NE501
Change reasons Important default configuration parameters (advertising interval) changed

2022.07.21: Advanced configuration possibilities in manufacturing

We would like to inform you that starting from July 21st, 2022. Manufacturing is capable of advanced pre-configuration options for BTSXXX devices.

It's now possible to configurate individual parameter values according to clients' demands, e.g:

  1. It's possible to write MAC into any other information advertising parameter that fits 6 bytes of information for example you can include MAC into UUID of the beacon into of name of the beacon.
  2. Also during production values can be generated from specific value and according to your logic. For example, you can generate minor from 0000 to FFFF.

2022.01.28: BOT Laser Printing Changes

We would like to inform you, that laser printing of the BTSMP1 device was updated in the factory in January 2022.

Change description
Change type External/visual
Detailed description Bot laser printing design changed
Old version:
BTSMP1-back-2022-02-02.3.png
New version:
BTSID1 BTSMP1 back 2022-01-04.3.png
Change reasons

1. Added Anatel certificate logo and number.
2. Added E-MARK certificate logo and number.
3. Added FCC ID.

Product release date January 2022
Affected products
Model Affected order codes Order code changes
BTSMP1 BTSMP1****** New laser engraving
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above