TST100 Trip/Odometer settings: Difference between revisions

Latest revision as of 13:12, 24 March 2023

Main Page > E-Mobility Trackers > TST100 > TST100 Configuration > TST100 Trip/Odometer settings

Trip Settings

Trip section offers user to configure the Trip feature. Trip starts when Ignition according to Ignition source is ON and also 'Start Speed' is exceeded.

Mode - Here the user can select Odometer distance counter mode.
- Continuous - Trip distance is going to be counted continuously (from Trip start to Trip end) and written to I/O Trip Odometer value field. When Trip is over and the next Trip begins, Trip Odometer value is reset to zero.
- Between Records - the distance is going to be counted between every record made. This value is written to I/O Trip Odometer value field and is reset to zero every new record until the Trip ends. If later all Odometer values are summed up manually, the distance driven during the whole duration of the Trip can be obtained.
Start Speed - defines the minimum GPS speed in order to detect Trip start.
Ignition OFF Timeout - is the timeout value to detect Trip end once the Ignition (configured ignition source) is OFF.

Odometer

Calculation Source - allows to choose Odometer calculation source.
- GNSS
- Scooter
Odometer Value - sets the starting total odometer value.

Revision as of 13:12, 24 March 2023 view source Martyna.D (talk \| contribs) 0 edits Created page with "{{Template:Trip/Odometer settings \|model=TST100 \|scnd_source=<code>Scooter</code> }} Category:TST100 Configuration"	Latest revision as of 13:12, 24 March 2023 view source Martyna.D (talk \| contribs) 0 edits m Protected "TST100 Trip/Odometer settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))
(No difference)