Difference between revisions of "GH5200 Auto Geofence settings"
From Wiki Knowledge Base | Teltonika GPS
(Created page with "{{Template:Auto Geofence settings |model=GH5200 |Activation_timeout= |Deactivate_by= }} Category:GH5200 Configuration") |
m (Protected "GH5200 Auto Geofence settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(No difference)
| |
Latest revision as of 10:47, 14 April 2023
Main Page > Autonomous Trackers > GH5200 > GH5200 Configuration > GH5200 Auto Geofence settingsAuto Geofence
AutoGeofence is based on the last known position after the movement has stopped. You can be notified using this function if your device leaves certain area. The shape and size of Geofence zones are set by parameters. It is possible to state whether entering or leaving the geofence triggers an asynchronous message. AutoGeofencing options can be configured by following parameters:
- Eventual Records - is used to enable or disable Eventual Records functionality.
- Generate Event - Event generation can take place on Geofence
Entrance,Exitor onBoth. - Activation timeout - is not configurable via configurator, by default 60 second value is used. Scenario can be activated through a SMS/GPRS command or by a configured button and can be disabled by SMS/GPRS, button or call.
- Radius - value around device's most recent position and when the ignition is off.
- Call settings - Disable or enable the availability to disable scenario with a call. This should be configured in SMS/Call section, configure Incoming Call Settings to Auto Geofence Off and set authorized numbers if such are used.
| NOTE | AutoGeofencing does not require entering coordinates, instead it requires GPS visibility. |
|---|
