EYE FUNCTIONALITIES

Page Description

This page will describe EYE device functionalities, their flow and functionality supporting software versions.

EYE Functionalities:

Connecting to the device

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.1.R.0 to 1.2.8.R.2
Step No.	1	2	3
Short step desc.	Tap the selected device to connect to it	Enter PIN	Connected
Successful attempt at functionality visual
Short step desc.	Tap the selected device to connect to it	Enter PIN incorrectly	Fail to enter PIN correctly 4 more times	Wait for 5 min timeout and enter PIN incorrectly	Fail to enter PIN correctly 4 more times
Additional desc.			Device is locked for 5 min but will allow to connect with PIN again after timeout		Device is locked for 5 min but will allow to connect with PIN again after timeout, thus this is continued in infinite loop.
Failed attempt at functionality visual		File:PIN_Code_(error).png		File:PIN_Code_(error).png

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.9.R.8+
Short step desc.	Tap the selected device to connect to it	Enter PIN incorrectly	Fail to enter PIN correctly 4 more times	Wait for 5 min timeout and enter PIN incorrectly	Fail to enter PIN correctly 4 more times
Additional desc.			Device is locked for 5 min but will allow to connect with PIN again after timeout		Device is locked with PUK code now and will remain so until correct PUK is entered, see PUK code unlock.
Failed attempt at functionality visual		File:PIN_Code_(error).png		File:PIN_Code_(error).png

PUK code unlock:

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.9.R.8+
Step No.
Short step desc.	Tap the blocked device to connect to it	Enter PUK	Connected
Additional desc.			PIN automatically resets to default
Successful attempt at functionality visual		File:PUK Code.png]
Step desc.	Tap the selected device to connect to it	Enter PUK incorrectly	Fail to enter PIN correctly 4 more times
Additional desc.		PUK is rejected and you can only go back or enter correct PUK
Failed attempt at functionality visual		File:PUK Code (error).png

Hibernate mode:

Wake up:

SW version requirements	Firmware: 1.2.9.R.8+
Step No.	1-3	4
Short step desc.	Attach magnet to sleeping device and wait for LED to blink.	Device starts broacasting
Additional desc.		Now device is discoverabled, scannable, connectable via BLE.
Successful attempt at functionality visual

Send to sleep:

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.9.R.8+
Step No.	1	2	3
Short step desc.	While connected and in overview tap "Send device to sleep"	Confirm your selection	Wait for EYE App to disconnect
Additional desc.			Device is no longer connectable or findable until wake up step is performed.
Successful attempt at functionality visual