Changes

1,663 bytes added ,  14:19, 31 August 2023
no edit summary
Line 1: Line 1:  
To use '''Manual CAN request functionality''' user should select '''''Manual CAN Requests'' tab''' in configurator. Afterwards, user will be able to configure CAN parameters in Manual CAN Request settings tab.
 
To use '''Manual CAN request functionality''' user should select '''''Manual CAN Requests'' tab''' in configurator. Afterwards, user will be able to configure CAN parameters in Manual CAN Request settings tab.
 +
 +
==Manual CAN Requests==
 +
 +
The main benefit of using '''Manual CAN requests functionality''' is that the user is able to read data via CAN BUS without requiring additional CAN protocol development from the device's firmware side, if parameters needed to be requested more frequently or vice versa. To read data with this functionality, the user must have:
 +
 +
* '''FMC650/FMM650/FMB641''' device
 +
* '''03.00.13.Rev.05''' or newer firmware (for '''FMC650/FMM650''')
 +
* '''03.01.00.Rev.00''' or newer firmware (for '''FMB641/FMC650/FMM650''')
 +
* Transport or equipment with CAN interface which works via ''J1939 protocol''
 +
* Transport or equipment CAN communication protocol (with information about ''frames'', ''parameters'', ''ID‘s'', ''Baudrate'')
 +
 +
==Manual CAN requests I/O settings==
 +
 +
User can configure up to 70 Manual CAN Request elements by setting '''CAN ID/Request ID''', '''Request Period''', '''Request Data Length''', '''RTR parameters'''. Additionally, in '''''Manual CAN I/O'' tab''', user needs to select by configured Manual Request input name – CAN type, Data mask Data Source, CAN ID Each CAN I/O has its own parameters and can be configured independently. Configured CAN request will be shown by '''Manual CAN IO AVL ID'''. (CHECK THIS FOR GRAMMAR)
 +
 +
{| class="wikitable" style="border-style: solid; border-width: 0px;"
 +
| style="width: auto; text-align: left; background: #F6F6FB;" |'''(!)''' Functionality '''will work''' only when Ignition '''is''' ON
 +
|}
 +
 +
Baudrates are configurable in ''CAN \ Tachograph'' tab settings for connected CAN line which could be CAN1 or CAN2.
 +
 +
For Manual CAN request functionality CAN is selected in Manual CAN IO tab